Find Research outputs

Search results

• A study on line operation planning for sewing works

  Weng, J., Banno, M. & Onari, H., 2006, In: Journal of Japan Industrial Management Association. 56, 6, p. 471-477 7 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A study on lifestyles promoting energy-saving: Focusing on people's values, energy-cognition and energy consumption among two-generation families in Tokyo Metropolitan Region

  Otsuka, A., Masuda, T. & Narumi, D., 2020 Oct, In: Journal of Environmental Engineering (Japan). 85, 776, p. 767-777 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• A study on length of lower limbs of adolescents in postwar Japan by relative growth

  Ikuyama, T. & Arao, T., 1980, In: Bulletin of the Physical Fitness Research Institute. NO. 45, p. 35-48 14 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on introduction of gas engine to micro-grid with genetic algorithm

  Yamaguchi, Y., Machida, R., Kaneko, S. & Yamasaki, Y., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• A study on intra-body communication for personal healthcare monitoring system

  Alshehab, A., Kobayash, N., Kikuchi, R., Ruiz, J., Shimamoto, S. & Ishibashi, H., 2008 Oct 6, 2008 10th IEEE Intl. Conf. on e-Health Networking, Applications and Service, HEALTHCOM 2008. p. 219-220 2 p. 4600139. (2008 10th IEEE Intl. Conf. on e-Health Networking, Applications and Service, HEALTHCOM 2008).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on intrabody communication for personal healthcare monitoring system

  Alshehab, A., Kobayashi, N., Ruiz, J., Kikuchi, R., Shimamoto, S. & Ishibashi, H., 2008 Oct 1, In: Telemedicine and e-Health. 14, 8, p. 851-857 7 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• A Study on Interactive Multicriteria Optimization Method Using Qualitative Reasoning

  Arakawa, M. & Yamakawa, H., 1991, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 57, 534, p. 413-419 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A Study on Integrated Process Planning and Scheduling System for Holonic Manufacturing

  Sugimura, N., Shrestha, R., Tanimizu, Y. & Iwamura, K., 2007, Springer Series in Advanced Manufacturing. Springer Nature, p. 311-334 24 p. (Springer Series in Advanced Manufacturing).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• A study on integrated process planning and scheduling system for holonic manufacturing

  Shrestha, R., Sugimura, N., Ichinose, K., Tanimizu, Y. & Iwamura, K., 2006 Mar, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 72, 3, p. 909-915 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Astudy on insolation reflectivity measurement of the cool palntlng surface: - A proposal of measuring method by the 2 point correction and accuracy testing on the horizontal surface

  Murata, Y., Sakai, K., Kanamori, H., Takebayashi, H., Matsuo, Y., Morhama, M., Yoshida, A., Niskioka, M., Yano, N., Shimizu, R., Miki, K., Murase, T. & Akbari, H., 2008 Oct, In: Journal of Environmental Engineering. 73, 632, p. 1209-1215 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• A study on information systems auditing processes using AHP - An approach to audit engineering

  Shimada, Y., Nakashima, K. & Nose, T., 2007 May 21, In: Journal of Japan Industrial Management Association. 57, 6, p. 511-519 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on individual mobility patterns based on individuals’ familiarity to visited areas

  Han, J. & Yamana, H., 2016, In: International Journal of Pervasive Computing and Communications. 12, 1, p. 23-48 26 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• A study on immune algoriths considering interaction of design with environment properties

  Miyashita, T. & Yamakawa, H., 2003 Dec 1, p. 945-950. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• A study on idea generation method for concept design using data envelopment analysis

  Satoh, D., Kobayashi, M. & Miyashita, T., 2009 Dec, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 75, 760, p. 3355-3363 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• A study on hybrid power plant system of fuel cell and li-ion battery for garbage truck

  Lee, H., Hirota, T., Ihara, Y., Yamaura, T. & Kamiya, Y., 2018 Apr 3, 2017 IEEE Vehicle Power and Propulsion Conference, VPPC 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. (2017 IEEE Vehicle Power and Propulsion Conference, VPPC 2017 - Proceedings; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on hybrid motion video coding schemes– block size, comparison of dct and vq schemes, loop filter

  Kato, Y., Okubo, S. & Suzuki, Y., 1990 Dec, In: Electronics and Communications in Japan (Part I: Communications). 73, 12, p. 45-54 10 p.

  Research output: Contribution to journal › Article › peer-review

• A STUDY ON HEXAPOD GAIT ADAPTATION BY ENUMERATIVE ENCODING AND PARTICLE SWARM OPTIMIZATION

  Parque, V., 2022, 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers (ASME), V002T02A078. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on heredity and evolution of designs considering kansei by using genetic algorithms

  Yamakawa, H., Arakawa, M. & Katsuyama, N., 1995, 11th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention; 7th International Conference on Design Theory and Methodology; JSME Symposium on Design and Production; Mechanical Design Education and History; Computer-Integrated Concurrent Design Conference. American Society of Mechanical Engineers (ASME), p. 727-732 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on growth processes of CoNiP perpendicular magnetic anisotropy films electroless-deposited at room temperature

  Homma, T., Sezai, Y. & Osaka, T., 1997, In: Electrochimica Acta. 42, 20-22, p. 3041-3047 7 p.

  Research output: Contribution to journal › Article › peer-review
  23 Citations (Scopus)

• A study on gas seal configuration for molten carbonate fuel cells (2nd report, experimental examination of gas seal configuration)

  Nakagaki, T., Nameki, H., Hirata, H. & Hori, M., 2002 Apr, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 68, 668, p. 1273-1280 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on gait recognition using LPC cepstrum for mobile terminal

  Ichino, M., Kasahara, H., Yoshii, H., Tsurumaru, K., Komatsu, N. & Katto, J., 2013 Oct 31, 2013 IEEE/ACIS 12th International Conference on Computer and Information Science, ICIS 2013 - Proceedings. p. 11-16 6 p. 6607809. (2013 IEEE/ACIS 12th International Conference on Computer and Information Science, ICIS 2013 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A Study on Gain Modulation Dynamics of 80nm-Band High-Power Raman Amplifier

  Imai, K., Morita, I., Sakata, H. & Edagawa, N., 2003, p. 158-159. 2 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• A Study on Gain Modulation Dynamics of 80nm-Band High-Power Raman Amplifier

  Imai, K., Morita, I., Sakata, H. & Edagawa, N., 2003, Optical Fiber Communication Conference, OFC 2003. Optica Publishing Group (formerly OSA), p. 158-159 2 p. TuC3. (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on fundamental properties of PSP in low pressure region

  Niimi, T., Yoshida, M., Kondo, M., Oshima, Y., Mori, H., Egami, Y., Asai, K. & Nishide, H., 2002 Dec, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 68, 676, p. 3360-3368 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A study on formation mechanisms of relief structure formed in situ on the surface of ceramics

  Zhang, W., Yamashita, S., Kumazawa, T., Ozeki, F., Hyuga, H., Norimatsu, W. & Kita, H., 2019 Dec 1, In: Ceramics International. 45, 17, p. 23143-23148 6 p.

  Research output: Contribution to journal › Article › peer-review

• A study on fingertip designs and their influences on performing stable prehension for robot hands

  Or, K., Morikuni, S., Ogasa, S., Funabashi, S., Schmitz, A. & Sugano, S., 2016 Dec 30, Humanoids 2016 - IEEE-RAS International Conference on Humanoid Robots. IEEE Computer Society, p. 772-777 6 p. 7803361

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• A Study on Facilities Layout (New Algorithm of Drawing “Relationship Diagram”)

  Yoshimoto, K., Hirose, A. & Mizoguchi, T., 1988, In: Transactions of the Japan Society of Mechanical Engineers Series C. 54, 499, p. 764-768 5 p.

  Research output: Contribution to journal › Article › peer-review

• A study on exploration of relationships between behaviors and mental states of learners for value co-creative education and learning environment

  Matsui, T., Horiguchi, Y., Kojima, K. & Akakura, T., 2014, Human Interface and the Management of Information: Information and Knowledge in Applications and Services - 16th International Conference, HCI International 2014, Proceedings. PART 2 ed. Springer Verlag, p. 69-79 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8522 LNCS, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on evaluation of demand information-sharing methods in supply chain

  Ryu, S. J., Tsukishima, T. & Onari, H., 2009 Jul, In: International Journal of Production Economics. 120, 1, p. 162-175 14 p.

  Research output: Contribution to journal › Article › peer-review
  65 Citations (Scopus)

• A study on estimation of three-dimensional tolerances based on simulation of virtual machining in turning processes including kinematic motion deviations

  Thasana, W., Sugimura, N., Iwamura, K. & Tanimizu, Y., 2015, In: Journal of Advanced Mechanical Design, Systems and Manufacturing. 9, 1

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• A study on estimation of the deformation behavior in the collapse process of lung

  Katsuyama, Y., Yamazaki, N., Kobayashi, Y., Hoshi, T. & Miyashita, T., 2012 Dec 14, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2012. p. 2817-2822 6 p. 6346550. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on estimation of 3-dimensional surface roughness of boring processes including kinematic motion deviations

  Thasana, W., Sugimura, N., Iwamura, K. & Tanimizu, Y., 2014, In: Journal of Advanced Mechanical Design, Systems and Manufacturing. 8, 4

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• A study on environmental tax for environmentally friendly products

  Nonaka, T. & Nakano, M., 2010 Nov, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 76, 771, p. 2791-2796 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on environmental factors of drink-driving in Japan

  Kasuga, N., Sawada, T. & Daisho, Y., 2008, In: Review of Automotive Engineering. 29, 4, p. 589-596 8 p.

  Research output: Contribution to journal › Article › peer-review

• A study on engineering process support for manufacturing systems (1st report, description of manufacturing system engineering process and development of support tool)

  Tanimizu, Y., Nagata, T., Sugimura, N., Mitsuyuki, K., Yura, Y. & Tokunaga, N., 2002 Jul, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 68, 7, p. 2211-2216 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A Study on Energy Tax Reform for Carbon Pricing Using an Input-Output Table for the Analysis of a Next-Generation Energy System

  Nakano, S. & Washizu, A., 2022 Mar 1, In: Energies. 15, 6, 2162.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on energy management system for hybrid powered railway vehicles with fuel cells and Electric Double Layer Capacitors

  Tsukahara, K. & Kondo, K., 2012 Dec 1, ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems. 6401961. (ICEMS 2012 - Proceedings: 15th International Conference on Electrical Machines and Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• A study on energy management controller of EDLC for batteries and capacitors hybrid electric vehicles

  Noumi, Y., Saito, T. & Kondo, K., 2014 Feb 24, IECON Proceedings (Industrial Electronics Conference). Institute of Electrical and Electronics Engineers Inc., p. 2952-2957 6 p. 7048929

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• A study on energy absorbing members for improvement of train crashworthiness

  Yamakawa, H., Oku, T., Funatsu, K. & Ujita, Y., 2004, Collection of Technical Papers - 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Vol. 1. p. 650-655 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on EMTP-analysis model for switch-board SPD with gap and propagation characteristics of lightning surge on simple indoor distribution line

  Sakamoto, Y., Miyazaki, T. & Okabe, S., 2009 Sept 21, In: IEEJ Transactions on Power and Energy. 129, 7, p. 914-920+7

  Research output: Contribution to journal › Article › peer-review

• A Study on Electroless Plating of Cobalt Alloy Films for Perpendicular Recording

  Osaka, T., Kasai, N. & Koiwa, I., 1983 Apr, In: Journal of the Electrochemical Society. 130, 4, p. 790-794 5 p.

  Research output: Contribution to journal › Article › peer-review
  36 Citations (Scopus)

• A study on effects of providing environmental information using three dimensional computer graphics

  Uchida, S., Morimoto, A. & Koike, H., 2019, EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering. Tizani, W. (ed.). Nottingham, (EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on ease and unease of enteriing to location o of shops based on recall method: A study on the evaluation structure of "ease and unease of entering" in location of shops

  Yamamoto, K., Itami, H. & Kojima, T., 2016 Jan, In: Journal of Environmental Engineering (Japan). 81, 719, p. 19-27 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on DWT-based digital audio watermarking for mobile ad hoc network

  Wu, Y. J. & Shimamoto, S., 2006 Dec 15, Proceedings - Thirteenth International Symposium on Temporal Representation and Reasoning, TIME 2006. p. 247-251 5 p. 1636282. (Proceedings - IEEE International Conference on Sensor Networks, Ubiquitous, and Trustworthy Computing; vol. 2006 I).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• A study on distance metric learning by using different metric matrices in each category

  Mikawa, K. & Goto, M., 2016, In: Journal of Japan Industrial Management Association. 66, 4, p. 335-347 13 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A Study on Direct Sensitivity Identification of Structures by Experimental Data and Optimum Designs Based on the Sensitivities

  Yamakawa, H. & Tubokura, Y., 1992, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 58, 546, p. 376-381 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on direct-ABC for specifying the factor of aggregating production cost

  Nakayama, K., Fujita, H., Ryu, S. J., Katahono, N. & Onari, H., 2011, 21st International Conference on Production Research: Innovation in Product and Production, ICPR 2011 - Conference Proceedings. Fraunhofer-Verlag

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on digital audio watermarking internet applications

  Wu, Y. & Shimamoto, S., 2008 Sept 9, 2008 IEEE International Conference on Sensor Networks, Ubiquitous, and Trustworthy Computing, SUTC 2008. p. 59-66 8 p. 4545740. (Proceedings - IEEE International Conference on Sensor Networks, Ubiquitous, and Trustworthy Computing).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on difference of codelengths between MDL codes and Bayes codes on case different priors are assumed

  Gotoh, M., Matsushima, T. & Hirasawa, S., 1997 Dec 1, Proceedings - 1997 IEEE International Symposium on Information Theory, ISIT 1997. 1 p. 613340. (IEEE International Symposium on Information Theory - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on difference of codelengths between codes based on MDL principle and bayes codes for given prior distributions

  Gotoh, M., Matsushima, T. & Hirasawa, S., 2001 Jan 1, In: Electronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi). 84, 4, p. 30-40 11 p.

  Research output: Contribution to journal › Article › peer-review