Find Research outputs

Search results

• A study on real-time scheduling for holonic manufacturing systems - Simulation for estimation of future status by individual holons

  Iwamura, K., Nakano, A., Tanimizu, Y. & Sugimura, N., 2007, Holonic and Multi-Agent Systems for Manufacturing - 3rd International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2007, Proceedings. Springer Verlag, p. 205-214 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4659 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on real-time scheduling for holonic manufacturing systems - Determination of utility values based on multi-agent reinforcement learning

  Iwamura, K., Mayumi, N., Tanimizu, Y. & Sugimura, N., 2009, Holonic and Multi-Agent Systems for Manufacturing - 4th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2009, Proceedings. p. 135-144 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5696 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• A study on real-time responsiveness on virtualization based multi-OS embedded systems

  Kinebuchi, Y., Mitake, H., Yasukawa, Y., Morita, T., Courbot, A. & Nakajima, T., 2011 Sept 12, PECCS 2011 - Proceedings of the 1st International Conference on Pervasive and Embedded Computing and Communication Systems. p. 369-378 10 p. (PECCS 2011 - Proceedings of the 1st International Conference on Pervasive and Embedded Computing and Communication Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on realization of combined amplitude and phase modulation employing elliptical signals

  Song, C. & Shimamoto, S., 2018, In: International Journal of Advanced Science and Technology. 24, p. 43-68 26 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on rate distortion optimization scheme for JVT coder

  Takagi, K., Takishima, Y. & Nakajima, Y., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5150 II, p. 914-923 10 p.

  Research output: Contribution to journal › Conference article › peer-review

• A study on quantization control scheme considering the characteristics between reduced bits and quantization error of increase

  Nagayoshi, I., Kasai, H., Hanamura, T., Kameyama, W. & Tominaga, H., 2001 Dec, In: Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers. 55, 12, 1 p.

  Research output: Contribution to journal › Article › peer-review

• A study on quantification of service productivity

  Yamaguchi, M., Yoshimoto, K. & Suzuki, H., 2013 Jan 1, In: Journal of Japan Industrial Management Association. 64, 1, p. 28-37 10 p.

  Research output: Contribution to journal › Article › peer-review

• A Study on Quality Function Deployment and Industrial Information: Towards Digital Transformation

  Kiuchi, M. & Nakashima, K., 2021, In: Journal of Japan Industrial Management Association. 72, 4 E, p. 281-284 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on Qualitative Optimization Using Qualitative Kansei Estimation: Development of Chair Which Derive High Efficiency

  Arakawa, M., Hagiwara, I., Kum, J. & Yamakawa, H., 1998, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 64, 622, p. 2162-2168 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on project risk analysis model for outsourcing based on Bayesian networks: Application to small company OEM project of mold industry

  Kim, Y. S., Murata, T. & Ki, J., 2018 Jan 1, Proceedings of the International MultiConference of Engineers and Computer Scientists 2018, IMECS 2018. Castillo, O., Feng, D. D., Korsunsky, A. M., Douglas, C. & Ao, S. I. (eds.). Newswood Limited, (Lecture Notes in Engineering and Computer Science; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on probabilistic thermal acceptability evaluation

  Ukai, M., Tsusaka, G. & Nobe, T., 2016, Proceedings - 9th International Windsor Conference 2016: Making Comfort Relevant. Nicol, F., Roaf, S., Brotas, L. & Humphreys, M. A. (eds.). NCEUB 2016, p. 985-993 9 p. (Proceedings - 9th International Windsor Conference 2016: Making Comfort Relevant).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A Study on Principal Component for Chemically Recuperated Gas Turbine with Natural Gas Steam Reforming (2nd Reropt, Experimental Study of Principal Component)

  Nakagaki, T., Yamada, M., Hirata, H. & Ohashi, Y., 2003 Dec, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 69, 688, p. 2725-2732 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on principal component for chemically recuperated gas turbine with natural gas steam reforming (1st report, system characteristics of CRGT and design of reformer)

  Nakagaki, T., Yamada, M., Hirata, H. & Ohashi, Y., 2003 Nov, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 69, 687, p. 2545-2552 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• A study on predictive control using short-term prediction method based on chaos theory

  Masumoto, N. & Yamakawa, H., 1997, American Society of Mechanical Engineers, Applied Mechanics Division, AMD. Vol. 223. p. 97-105 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  1 Citation (Scopus)

• A study on predictive control using a short-term prediction method based on chaos theory (determination of the control force using plural predicted disturbances)

  Masumoto, N. & Yamakawa, H., 1998, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Vol. 97. p. 179-184 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  4 Citations (Scopus)

• A Study on Prediction of Unburned Hydrocarbons in Active Pre-chamber Gas Engine: Combustion Analysis Using 3D-CFD by Considering Wall Quenching Effects

  Shota, T., Kato, T., Sudo, Z., Zhou, B., Kusaka, J., Yamazaki, H., Koga, T. & Imamori, Y., 2021 Sept 5, In: SAE Technical Papers. 2021

  Research output: Contribution to journal › Conference article › peer-review

• A study on preconditions setting of long-term contract between manufacturer and component supplier

  Wu, S. & Onari, H., 2015, 23rd International Conference for Production Research, ICPR 2015. International Foundation for Production Research (IFPR)

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on power distribution methods between fuel cell and Li-ion battery for a fuel cell garbage truck

  Katagiri, D., Lee, H., Kamiya, Y., Hirota, T., Ihara, Y. & Yamaura, T., 2018.

  Research output: Contribution to conference › Paper › peer-review

• A study on persuasive effect of preference of virtual agents

  Yoshii, A. & Nakajima, T., 2014 Feb 17, Advanced Technologies, Embedded and Multimedia for Human-Centric Computing, HumanCom and EMC 2013. p. 47-55 9 p. (Lecture Notes in Electrical Engineering; vol. 260 LNEE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on performance prediction of Darrieus-type hydroturbine operated in open channels using CFD with actuator disk method

  Suzuki, Y., Katayama, Y., Watanabe, S., Tsuda, S. & Furukawa, A., 2019 Mar 28, In: IOP Conference Series: Earth and Environmental Science. 240, 4, 042020.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• A study on path planning for small mobile robot to move in forest area

  Tanaka, K., Okamoto, Y., Ishii, H., Kuroiwa, D., Yokoyama, H., Inoue, S., Shi, Q., Okabayashi, S., Sugahara, Y. & Takanishi, A., 2018 Mar 23, 2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017. Institute of Electrical and Electronics Engineers Inc., p. 2167-2172 6 p. (2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on pancaking problem in Japanese power market

  Nishiyauchi, A., Kamemura, Y., Ohtaka, T. & Iwamoto, S., 2004, 2004 International Conference on Power System Technology, POWERCON 2004. Vol. 1. p. 171-176 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on optimum topology of plate structure using coordinate transformation by conformal mapping

  Kitayama, S., Yamazaki, K. & Yamakawa, H., 2004 Apr, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 70, 4, p. 1016-1022 7 p.

  Research output: Contribution to journal › Article › peer-review

• A study on optimum topology of plate structure using coordinate transformation by conformal mapping

  Kitayama, S. & Yamakawa, H., 2002, Proceedings of the ASME Design Engineering Technical Conference. Vol. 2. p. 169-174 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A Study on Optimum Design Using Fuzzy Numbers as Design Variables (2nd Report, Development of Simple Fuzzy Number Operation and Its Application)

  Arakawa, M. & Yamakawa, H., 1992, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 58, 550, p. 1716-1721 6 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• A Study on Optimum Design Using Fuzzy Numbers as Design Variables (1st Report, Proposition of Optimum Design Method)

  Arakawa, M. & Yamakawa, H., 1992, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 58, 550, p. 1710-1715 6 p.

  Research output: Contribution to journal › Article › peer-review

• A Study on optimum design using fuzzy numbers as design variabies

  Arakawa, M. & Yamakawa, H., 1995, 21st Design Automation Conference. American Society of Mechanical Engineers (ASME), p. 463-470 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on optimum circulation period of products for minimizing lifecycle energy consumption

  Mizuno, Y., Kintoki, N., Kishita, Y., Fukushige, S. & Umeda, Y., 2015, In: Procedia CIRP. 29, p. 597-602 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• A Study on Optimizing SHEV Components Specifications and Control Parameter Values for the Reduction of Fuel Consumption by Using a Genetic Algorithm

  Cao, X., Asano, N., Yamagishi, T., Yamaguchi, K., Mizushima, N., Noyori, T., Kusaka, J., Minamitani, K. & Kondo, Y., 2022 Mar 29, In: SAE Technical Papers. 2022

  Research output: Contribution to journal › Conference article › peer-review

• A study on optimization the structure of ship in consideration of layout of the stiffeners

  Nonami, R., Kitamura, M., Takezawa, A. & Hirakawa, S., 2014, Proceedings of the 24th International Ocean and Polar Engineering Conference, ISOPE Busan. International Society of Offshore and Polar Engineers, p. 876-882 7 p. (Proceedings of the International Offshore and Polar Engineering Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on optimal discount strategy of perishable food in supermarkets

  Sato, K., Nakamoto, T. & Nakashima, K., 2018, In: Journal of Japan Industrial Management Association. 69, 2, p. 77-83 7 p.

  Research output: Contribution to journal › Article › peer-review

• A study on operator allocation method considering the process of Skill proficiency in cell manufacturing systems

  Haraguchi, H., Kaihara, T., Fujii, N. & Nonaka, T., 2014 Oct 23, Proceedings of the SICE Annual Conference. Society of Instrument and Control Engineers (SICE), p. 1400-1406 7 p. 6935273. (Proceedings of the SICE Annual Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on OFDM millimeter-wave radio over fiber system

  Thi, T. H. & Matsumoto, M., 2013, Progress in Electromagnetics Research Symposium. p. 1321-1325 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on occupant kinematics behaviour and muscle activities during pre-impact braking based on volunteer tests

  Ejima, S., Ono, K., Holcombe, S., Kaneoka, K. & Fukushima, M., 2007 Dec 1, International Research Council on the Biomechanics of Injury - 2007 International IRCOBI Conference on the Biomechanics of Injury, Proceedings. p. 31-45 15 p. (International Research Council on the Biomechanics of Injury - 2007 International IRCOBI Conference on the Biomechanics of Injury, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  42 Citations (Scopus)

• A study on observation results of lightning phenomena on distribution lines based on a lightning-surge analysis model for direct lightning strokes

  Miyazaki, T., Okabe, S., Aiba, K., Hirai, T. & Yoshinaga, J., 2006 Jan 1, In: IEEJ Transactions on Power and Energy. 126, 12, p. 1295-1303+15

  Research output: Contribution to journal › Article › peer-review

  Open Access
  10 Citations (Scopus)

• A study on object detection method from manga images using CNN

  Yanagisawa, H., Yamashita, T. & Watanabe, H., 2018 May 30, 2018 International Workshop on Advanced Image Technology, IWAIT 2018. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. (2018 International Workshop on Advanced Image Technology, IWAIT 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  41 Citations (Scopus)

• A Study on New Product Recommendation Using Multi-Label CVAE for Fresh Flowers

  Kitasato, A., Kumoi, G. & Goto, M., 2021, 2021 IEEE 12th International Workshop on Computational Intelligence and Applications, IWCIA 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., (2021 IEEE 12th International Workshop on Computational Intelligence and Applications, IWCIA 2021 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on N₂O formation mechanism and its reduction in a urea SCR system employed in a di diesel engine

  Matsui, W., Suzuki, T., Ohta, Y., Ito, S., Tanaka, Y., Kikuchi, Y., Daisho, Y., Suzuki, H. & Ishii, H., 2012, SAE Technical Papers. Vol. 9.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on multiply connected domain processing methods in magnetostatic field analysis by boundary integral equations

  Ryu, K., Wakao, S., Takahashi, Y., Ishibashi, K. & Fujiwara, K., 2017, In: IEEJ Transactions on Power and Energy. 137, 2, p. 132-137 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A Study on Multi-objective Vehicle Rounting Problem considering Customer Satisfaction with Due-time (The Creation of Pareto Optimal Solutions by Hybrid Genetic Algorithm)

  Sessomboon, W., Watanabe, K., Irohara, T. & Yoshimoto, K., 1998, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 64, 619, p. 1108-1115 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  8 Citations (Scopus)

• A study on multi-level structural optimum design using qualitative sensitivities

  Arakawa, M. & Yamakawa, H., 1994, 5th Symposium on Multidisciplinary Analysis and Optimization, 1994. American Institute of Aeronautics and Astronautics Inc, AIAA, p. 606-612 7 p. AIAA-94-4316-CP

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on multi-criteria structural optimum design using qualitative and fuzzy reasoning

  Arakawa, M. & Yamakawa, H., 1993, In: Finite Elements in Analysis and Design. 14, 2-3, p. 127-142 16 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on mud particle velocities and mass transport in wave-current-mud interaction

  Soltanpour, M., Shamsnia, S. H., Shibayama, T. & Nakamura, R., 2018 Sept, In: Applied Ocean Research. 78, p. 267-280 14 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• A study on motion estimation using block matching for spatially periodic patterns

  Kimura, J. I., Komatsu, N., Katto, J. & Kodama, M., 2015, In: ITE Transactions on Media Technology and Applications. 3, 1, p. 58-66 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on motion compensated prediction in DCT domain with multiple mode selection

  Yamagisi, K., Katto, J. & Yasuda, Y., 2003 Dec 9, Picture Coding Symposium. p. 87-91 5 p. (Picture Coding Symposium).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on modeling of stress-strain relationship and panel points of steel truss bridges used in dynamic response analysis

  Michitani, A., Ono, K. & Nishimura, N., 2013.

  Research output: Contribution to conference › Paper › peer-review

• A study on modeling and analysis of kinematic motion deviations of machine tools (2nd report, modeling and analysis of linear tables and mechine tools)

  Satonaka, N., Sugimura, N., Tanimizu, Y. & Iwamura, K., 2008 Jan, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 74, 1, p. 198-205 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)

• A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)

  Satonaka, N., Sugimura, N., Tanimizu, Y. & Iwamura, K., 2005 Aug, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 71, 8, p. 2622-2628 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• A Study on Mineral and Sulfur Rejection from Coal Using a Small-Scale Floatation Column

  Matsukata, M., Fujimoto, H. & Ueyama, K., 1995, In: Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy. 74, 11, p. 970-979 10 p.

  Research output: Contribution to journal › Article › peer-review

• A study on methods to design and select energy storage devices for Fuel Cell hybrid powered railway vehicles

  Tsukahara, K. & Kondo, K., 2013 Dec 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4534-4539 6 p. 6699866. (IECON Proceedings (Industrial Electronics Conference)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)