Find Research outputs

Search results

• Study on flow instability and countermeasure in a draft tube with swirling flow

  Nakashima, T., Matsuzaka, R., Miyagawa, K., Yonezawa, K. & Tsujimoto, Y., 2015, In: International Journal of Fluid Machinery and Systems. 8, 4, p. 230-239 10 p., A02.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Study on flow instability and countermeasure in a draft tube with swirling flow

  Nakashima, T., Matsuzaka, R., Miyagawa, K., Yonezawa, K. & Tsujimoto, Y., 2014, In: IOP Conference Series: Earth and Environmental Science. 22, 032007.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Study on flow instability in a diffuser with swirling flow under several conditions of pipe length and swirl intensity

  Matsuzaka, R., Nakashima, T. & Miyagawa, K., 2016 Dec 13, In: IOP Conference Series: Earth and Environmental Science. 49, 8, 082015.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Study on fluent interaction with multi-touch in traditional GUI environments

  Sousa, C. & Matsumoto, M., 2007, IEEE Region 10 Annual International Conference, Proceedings/TENCON. 4429094

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on formation mechanism of (112̄0) textured Zno films

  Kawamoto, T., Matsukawa, M., Watanabe, Y. & Yanagitani, T., 2006 Dec 1, 2006 IEEE International Ultrasonics Symposium, IUS. p. 1529-1532 4 p. 4152244. (Proceedings - IEEE Ultrasonics Symposium; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study on freezing process of killifish egg: utilizing the undercooled state for cryopreservation.

  Ujihira, M., Aizawa, N. & Tanishita, K., 1994, In: Bio-Medical Materials and Engineering. 4, 2, p. 115-125 11 p.

  Research output: Contribution to journal › Article › peer-review

• Study on frequency multiplier of a pulsed laser repetition using an optical cavity

  Kobayashi, T., Suzuki, R., Sakaue, K. & Washio, M., 2015, 6th International Particle Accelerator Conference, IPAC 2015. Joint Accelerator Conferences Website (JACoW), p. 1629-1631 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on functionally gradient proton exchange membrane fabricated by EB irradiation with heterogeneous energy deposition

  Fujita, H., Shiraki, F., Yoshikawa, T., Oshima, A. & Washio, M., 2010, In: Journal of Photopolymer Science and Technology. 23, 3, p. 387-392 6 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Study on gait discrimination method by deep learning for biofeedback training optimized for individuals

  Osawa, Y., Watanuki, K., Kaede, K. & Muramatsu, K., 2019, Intelligent Human Systems Integration 2019 - Proceedings of the 2nd International Conference on Intelligent Human Systems Integration IHSI 2019: Integrating People and Intelligent Systems, 2019. Ahram, T. & Karwowski, W. (eds.). Springer Verlag, p. 155-161 7 p. (Advances in Intelligent Systems and Computing; vol. 903).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on gas seal configuration for molten carbonate fuel cells

  Nakagaki, T., Nameki, H., Hirata, H. & Hori, M., 1997 Dec 1, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 63, 616, p. 241-246 6 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Geometrically Constrained IVA with Auxiliary Function Approach and VCD for In-Car Communication

  Goto, K., Li, L., Takahashi, R., Makino, S. & Yamada, T., 2020 Dec 7, 2020 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2020 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 858-862 5 p. 9306473. (2020 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2020 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on Growth Process of Ag(In, Ga)Se2 Films by a Three-Stage Co-Evaporation Method Using Molecular Beam Epitaxy Apparatus

  Zhang, X. & Kobayashi, M., 2017 Apr, In: IEEE Photonics Journal. 9, 2, 7858727.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on Heat Pipe: 3rd Report, Heat Transfer Mechanism in the Evaporator with Screen Mesh Wick

  Morooka, S., Kuroki, T. & Waki, T., 1981 Jan 1, In: Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 47, 414, p. 351-360 10 p.

  Research output: Contribution to journal › Article › peer-review

• STUDY ON HEAT PIPE - 2. HEAT TRANSFER MECHANISM IN THE EVAPORATOR ZONE OF HEAT PIPE.

  Shibayama, S. & Morooka, S., 1979 Sept, In: Bulletin of the JSME. 22, 171, p. 1243-1250 8 p.

  Research output: Contribution to journal › Article › peer-review

• STUDY ON HEAT TRANSFER IN THE BWR CORE DURING LOCA: HEAT TRANSFER TO FALLING FILM AT HIGH PRESSURE AND HIGH TEMPERATURE.

  Morooka, S., Inai, N. & Tobimatsu, T., 1982, Heat Transfer, Proceedings of the International Heat Transfer Conference. Washington, DC, USA: Hemisphere Publ Corp, p. 511-515 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on heredity and evolution of designs by using genetic algorithms

  Yamakawa, H., 1995 Dec, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 61, 592, p. 4646-4652 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Study on heredity and evolution of designs considering Kansei by using genetic algorithms

  Yamakawa, H., Arakawa, M. & Katsuyama, N., 1995, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. Gadh, R. (ed.). 2 Pt 2 ed. New York, NY, United States: ASME, Vol. 83. p. 727-732 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Study on high-speed twin-roll caster for aluminum alloys

  Haga, T. & Suzuki, S., 2003 Dec 20, In: Journal of Materials Processing Technology. 143-144, 1, p. 895-900 6 p.

  Research output: Contribution to journal › Article › peer-review
  37 Citations (Scopus)

• Study on how to use alumni network as mentor platform in entrepreneurial and incubation process for university start-ups with technology seeds

  Maki, K., Miyachi, E. & Kabasawa, S., 2011 Mar, In: Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers. 65, 3, p. 395-402 8 p.

  Research output: Contribution to journal › Article › peer-review

• Study on human gesture recognition from moving camera images

  Luo, D. & Ohya, J., 2010, 2010 IEEE International Conference on Multimedia and Expo, ICME 2010. p. 274-279 6 p. 5582998. (2010 IEEE International Conference on Multimedia and Expo, ICME 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Study on human physiological change in ELF electric field exposure II -Relationship to blood flow change by vibration stimulation

  Ishikawa, T., Shimizu, H. O., Kitama, M., Yamashita, M., Arisawa, J. & Shimizu, K., 2014 Aug 17, In: Transactions of Japanese Society for Medical and Biological Engineering. 52, p. O-36-O-37

  Research output: Contribution to journal › Comment/debate › peer-review

• Study on hybrid au-underfill resin bonding method with lock-and-key structure for 3-D integration

  Nimura, M., Mizuno, J., Shigetou, A., Sakuma, K., Ogino, H., Enomoto, T. & Shoji, S., 2013, In: IEEE Transactions on Components, Packaging and Manufacturing Technology. 3, 4, p. 558-565 8 p., 6449300.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Study on ice storage system in advanced co-generation system on the operational planning

  Tomizawa, M., Takeshita, K., Amano, Y., Hashizume, T. & Akiba, M., 2003 Apr, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 69, 680, p. 888-893 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on identification of structural system and optimum design by neural network

  Watari, S. & Yamakawa, H., 1995 Nov, In: Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 61, 591, p. 4238-4244 7 p.

  Research output: Contribution to journal › Article › peer-review

• Study on ideological and political education on the condition of network

  Di, Z., 2011 Dec 1, ITME 2011 - Proceedings: 2011 IEEE International Symposium on IT in Medicine and Education. p. 439-441 3 p. 6132143. (ITME 2011 - Proceedings: 2011 IEEE International Symposium on IT in Medicine and Education; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on improvement for the prediction accuracy of natural circulation flow rate by investigating void fraction correlation

  Yoshimura, S., Yamaguchi, T., Ino, K., Furuya, M. & Morooka, S., 2021 Aug 15, In: Nuclear Engineering and Design. 380, 111293.

  Research output: Contribution to journal › Article › peer-review

• Study on Improvement of Estimation Accuracy in Pose Estimation Model Using Time Series Correlation

  Yamakawa, A., Ishikawa, T. & Watanabe, H., 2020 Oct 13, 2020 IEEE 9th Global Conference on Consumer Electronics, GCCE 2020. Institute of Electrical and Electronics Engineers Inc., p. 409-412 4 p. 9291962. (2020 IEEE 9th Global Conference on Consumer Electronics, GCCE 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on improvement of leidenfrost and quenching properties by radiation induced surface activation

  Takamasa, T., Hazuku, T., Fukuhara, Y., Tamura, N., Takano, M., Hayashi, T., Okamoto, K., Imai, Y., Furuya, M., Mishima, K. & Hibiki, T., 2004 Apr 1, In: KURRI Progress Report. 1 p., 3.01.

  Research output: Contribution to journal › Article › peer-review

• Study on increasing resistivity of electrodeposited high B_S CoNiFe thin film

  Yokoshima, T., Kaseda, M., Yamada, M., Nakanishi, T., Momma, T. & Osaka, T., 1999, In: Digests of the Intermag Conference. p. GQ-01

  Research output: Contribution to journal › Conference article › peer-review

• Study on in-plane and out-of-plane deformation considering elastic plasticity of membrane

  Torisaka, A., Ogawa, K., Miura, S., Parque, V., Miyashita, T. & Yamakawa, H., 2019 Jan 1, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc, AIAA, (AIAA Scitech 2019 Forum).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Study on interaction between coal and model plastics during liquid-phase catalytic coliquefaction

  Yamaguchi, H., Okuyama, Y., Matsubara, K., Bi, J., Kodera, Y., Kamo, T. & Sato, Y., 1998, In: ACS Division of Fuel Chemistry, Preprints. 43, 3, p. 707-709 3 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Japanese driver eye position

  Ishida, T. & Matsuno, M., 1975, SAE Technical Papers.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• STUDY ON JAPANESE DRIVER EYE POSITION.

  Ishida, T. & Matsuno, M., 1975, SAE Prepr. 750360 ed.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• Study on landscape recognition that uses image processing technology by local inhabitants in Kamakura

  Yamada, S., Shintani, N. & Ohuchi, H., 2009 May 16, In: Journal of Asian Architecture and Building Engineering. 8, 1, p. 151-158 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on learning effect by active manipulation using tangible solar system teaching equipment

  Setozaki, N., Iwasaki, T. & Morita, Y., 2010, Proceedings of the 18th International Conference on Computers in Education: Enhancing and Sustaining New Knowledge Through the Use of Digital Technology in Education, ICCE 2010. p. 211-213 3 p. (Proceedings of the 18th International Conference on Computers in Education: Enhancing and Sustaining New Knowledge Through the Use of Digital Technology in Education, ICCE 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on learning strategies in elementary school physical education

  Kaji, M. & Ono, Y., 2021 Nov, In: Journal of Physical Education and Sport. 21, p. 3211-3217 7 p., 439.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on light and thermal energy of illumination device for plant factory design

  Yoshida, A., Moriuchi, K., Ueda, Y. & Kinoshita, S., 2018 Feb 7, In: IOP Conference Series: Materials Science and Engineering. 297, 1, 012063.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Study on likelihood-ratio-based multivariate EWMA control chart using Lasso

  Saruhashi, T., Ohkubo, M. & Nagata, Y., 2021, In: Quality Innovation Prosperity. 25, 1, p. 3-15 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Study on load distribution and ball motion of ball screw

  Yoshida, T., Tozaki, Y. & Matsumoto, S., 2003, In: Toraibarojisuto/Journal of Japanese Society of Tribologists. 48, 8 SPEC ISS., p. 659-666 8 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Study on load distribution and ball motion of ball screw

  Yoshida, T., Tozaki, Y. & Matsumoto, S., 2003, In: Japanese Journal of Tribology. 48, 4, p. 383-396 14 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Study on low-temperature crystallization of SrBi₂Ta₂O₉ thin films prepared by sol-gel method using steam curing process

  Sawada, Y., Kobari, H., Sato, Y., Hashimoto, A., Koiwa, I., Kobayashi, H. & Osaka, T., 1999, In: Integrated Ferroelectrics. 26, 1, p. 187-195 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)

• Study on making Klima-atlas with citizen participation: - Walking tour with citizens to experience and measure the urban thermal environment

  Masuda, Y., Okadome, S., Kagiya, K., Takaguchi, H., Takahashi, N. & Ojima, T., 2010 Feb, In: AIJ Journal of Technology and Design. 16, 32, p. 215-219 5 p.

  Research output: Contribution to journal › Article › peer-review

• Study on maximization method of output density for an induction motor

  Shiraki, N. & Kondo, K., 2013 Dec 1, 2013 International Conference on Electrical Machines and Systems, ICEMS 2013. p. 2006-2011 6 p. 6713169. (2013 International Conference on Electrical Machines and Systems, ICEMS 2013).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Study on measurement method of radio waves generated by charged particles in cosmic-ray air showers using a particle accelerator

  Katayose, Y., Asaba, T., Honda, K., Kodaira, S., Koshiba, Y., Sakaue, K., Saito, T., Sasaki, T., Takasaki, K., Yagisawa, K. & Wakamatsu, M., 2019, In: Proceedings of Science. 358

  Research output: Contribution to journal › Conference article › peer-review

• Study on medical economic evaluation methods for metastatic brain tumors therapy

  Takura, T., Hayashi, M., Muragaki, Y., Iseki, H. & Uetsuka, Y., 2010 Jul, In: Neurological Surgery. 38, 7, p. 629-637 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Study on method for protecting speech privacy by actively controlling speech transmission index in simulated room

  Unoki, M., Kashihara, Y., Kobayashi, M. & Akagi, M., 2018 Feb 5, Proceedings - 9th Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2017. Institute of Electrical and Electronics Engineers Inc., p. 1199-1204 6 p. (Proceedings - 9th Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2017; vol. 2018-February).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on method to simulate light propagation on tissue with characteristics of radial-beam LED based on Monte-carlo method

  Song, S., Elgezua, I., Kobayashi, Y. & Fujie, M. G., 2013, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. p. 25-28 4 p. 6609428

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Study on method to simulate light propagation on tissue with characteristics of radial-beam LED based on Monte-Carlo method

  Song, S., Elgezua, I., Kobayashi, Y. & Fujie, M. G., 2013, In: Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. 2013, p. 25-28 4 p.

  Research output: Contribution to journal › Article › peer-review

• Study on Microcontroller Board Design Planning for Design Education

  Nam, W. & Choh, I., 2019 Jul, Proceedings of the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019, ICKII 2019. Meen, T-H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 557-560 4 p. 9042667. (Proceedings of the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019, ICKII 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on minimum energy collision-free trajectory planning for rigid manipulators

  Lee, S. J. & Yamakawa, H., 1998 Mar, In: JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Manufacturing. 41, 1, p. 101-107 7 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)