Find Research outputs

Search results

• A study on mud particle velocities and mass transport in wave-current-mud interaction

  Soltanpour, M., Shamsnia, S. H., Shibayama, T. & Nakamura, R., 2018 Sept, In: Applied Ocean Research. 78, p. 267-280 14 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• A study on motion estimation using block matching for spatially periodic patterns

  Kimura, J. I., Komatsu, N., Katto, J. & Kodama, M., 2015, In: ITE Transactions on Media Technology and Applications. 3, 1, p. 58-66 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on motion compensated prediction in DCT domain with multiple mode selection

  Yamagisi, K., Katto, J. & Yasuda, Y., 2003 Dec 9, Picture Coding Symposium. p. 87-91 5 p. (Picture Coding Symposium).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on modeling of stress-strain relationship and panel points of steel truss bridges used in dynamic response analysis

  Michitani, A., Ono, K. & Nishimura, N., 2013.

  Research output: Contribution to conference › Paper › peer-review

• A study on modeling and analysis of kinematic motion deviations of machine tools (2nd report, modeling and analysis of linear tables and mechine tools)

  Satonaka, N., Sugimura, N., Tanimizu, Y. & Iwamura, K., 2008 Jan, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 74, 1, p. 198-205 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)

• A study on modeling and analysis of kinematic motion deviations of machine tools (1st report, modeling and analysis of geometric deviations of constituting units)

  Satonaka, N., Sugimura, N., Tanimizu, Y. & Iwamura, K., 2005 Aug, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 71, 8, p. 2622-2628 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• A Study on Mineral and Sulfur Rejection from Coal Using a Small-Scale Floatation Column

  Matsukata, M., Fujimoto, H. & Ueyama, K., 1995, In: Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy. 74, 11, p. 970-979 10 p.

  Research output: Contribution to journal › Article › peer-review

• A study on methods to design and select energy storage devices for Fuel Cell hybrid powered railway vehicles

  Tsukahara, K. & Kondo, K., 2013 Dec 1, Proceedings, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. p. 4534-4539 6 p. 6699866. (IECON Proceedings (Industrial Electronics Conference)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• A study on methodology to make team (methodology: Phase ?

  Sugimoto, Y., Arakawa, M. & Ishimaru, M., 2017, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), 67050. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A Study on Menu Planning Method Considering the Variation in Menu Orders - Application to Daily Foods in a Company Cafeteria

  Watanabe, R., Fujii, N., Kokuryo, D., Kaihara, T., Irie, K., Yanagita, K. & Harada, K., 2021, Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems - IFIP WG 5.7 International Conference, APMS 2021, Proceedings. Dolgui, A., Bernard, A., Lemoine, D., von Cieminski, G. & Romero, D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 224-231 8 p. (IFIP Advances in Information and Communication Technology; vol. 632 IFIP).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on mental characteristics of drivers-irritation and hostile sentiment of juvenile drivers

  Kasuga, N. & Daisho, Y., 2005 Oct, In: Review of Automotive Engineering. 26, 4, p. 497-503 7 p.

  Research output: Contribution to journal › Article › peer-review

• A study on measuring of reinforced-concrete structure by 3D laser scanner and making design of pre-cut interior finishing components with polygon model

  Ishida, K., Kano, N., Igarashi, T., Fujii, H., Oosawa, Y., Sakamoto, S. & Tomita, H., 2013, p. 1208-1215. 8 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access
  1 Citation (Scopus)

• A study on measurement of conformability of the piston oil ring on the cylinder bore under engine operating condition by lif method using optical fiber

  Ito, A., Mochiduki, K., Kikuhara, K., Inui, M. & Akamatsu, H., 2013, Fuels; Numerical Simulation; Engine Design, Lubrication, and Applications. American Society of Mechanical Engineers (ASME), (ASME 2013 Internal Combustion Engine Division Fall Technical Conference, ICEF 2013; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• A study on measurement of conformability of the piston oil ring on the cylinder bore under engine operating condition by laser induced fluorescence method using optical fiber

  Ito, A., Mochiduki, K., Kikuhara, K., Inui, M. & Akamatsu, H., 2014 Dec, In: Journal of Engineering for Gas Turbines and Power. 136, 12, 121503.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• A study on low temperature SAM modified POM direct bonding affected by VUV/O₃ irradiation

  Fu, W., Ma, B., Kuwae, H., Shoji, S. & Mizuno, J., 2017 Jun 13, Proceedings of 2017 5th International Workshop on Low Temperature Bonding for 3D Integration, LTB-3D 2017. Institute of Electrical and Electronics Engineers Inc., p. 69 1 p. 7947465

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on load frequency control combining a PID controller and a disturbance observer

  Shibasaki, S., Onishi, H. & Iwamoto, S., 2009 Dec 16, Transmission and Distribution Conference and Exposition: Asia and Pacific, T and D Asia 2009. 5356861

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• A study on living environment of evacuees after the great east Japan Earthquake - A case study in Miyagi prefecture

  Ishikawa, N. & Kojima, T., 2017 Feb, In: AIJ Journal of Technology and Design. 23, 53, p. 165-170 6 p.

  Research output: Contribution to journal › Review article › peer-review

• A study on line operation planning for sewing works

  Weng, J., Banno, M. & Onari, H., 2006, In: Journal of Japan Industrial Management Association. 56, 6, p. 471-477 7 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• A study on lifestyles promoting energy-saving: Focusing on people's values, energy-cognition and energy consumption among two-generation families in Tokyo Metropolitan Region

  Otsuka, A., Masuda, T. & Narumi, D., 2020 Oct, In: Journal of Environmental Engineering (Japan). 85, 776, p. 767-777 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• A study on length of lower limbs of adolescents in postwar Japan by relative growth

  Ikuyama, T. & Arao, T., 1980, In: Bulletin of the Physical Fitness Research Institute. NO. 45, p. 35-48 14 p.

  Research output: Contribution to journal › Article › peer-review

• A study on introduction of gas engine to micro-grid with genetic algorithm

  Yamaguchi, Y., Machida, R., Kaneko, S. & Yamasaki, Y., 2014 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• A study on intra-body communication for personal healthcare monitoring system

  Alshehab, A., Kobayash, N., Kikuchi, R., Ruiz, J., Shimamoto, S. & Ishibashi, H., 2008 Oct 6, 2008 10th IEEE Intl. Conf. on e-Health Networking, Applications and Service, HEALTHCOM 2008. p. 219-220 2 p. 4600139. (2008 10th IEEE Intl. Conf. on e-Health Networking, Applications and Service, HEALTHCOM 2008).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on intrabody communication for personal healthcare monitoring system

  Alshehab, A., Kobayashi, N., Ruiz, J., Kikuchi, R., Shimamoto, S. & Ishibashi, H., 2008 Oct 1, In: Telemedicine and e-Health. 14, 8, p. 851-857 7 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• A Study on Interactive Multicriteria Optimization Method Using Qualitative Reasoning

  Arakawa, M. & Yamakawa, H., 1991, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 57, 534, p. 413-419 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A Study on Integrated Process Planning and Scheduling System for Holonic Manufacturing

  Sugimura, N., Shrestha, R., Tanimizu, Y. & Iwamura, K., 2007, Springer Series in Advanced Manufacturing. Springer Nature, p. 311-334 24 p. (Springer Series in Advanced Manufacturing).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• A study on integrated process planning and scheduling system for holonic manufacturing

  Shrestha, R., Sugimura, N., Ichinose, K., Tanimizu, Y. & Iwamura, K., 2006 Mar, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 72, 3, p. 909-915 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Astudy on insolation reflectivity measurement of the cool palntlng surface: - A proposal of measuring method by the 2 point correction and accuracy testing on the horizontal surface

  Murata, Y., Sakai, K., Kanamori, H., Takebayashi, H., Matsuo, Y., Morhama, M., Yoshida, A., Niskioka, M., Yano, N., Shimizu, R., Miki, K., Murase, T. & Akbari, H., 2008 Oct, In: Journal of Environmental Engineering. 73, 632, p. 1209-1215 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• A study on information systems auditing processes using AHP - An approach to audit engineering

  Shimada, Y., Nakashima, K. & Nose, T., 2007 May 21, In: Journal of Japan Industrial Management Association. 57, 6, p. 511-519 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on individual mobility patterns based on individuals’ familiarity to visited areas

  Han, J. & Yamana, H., 2016, In: International Journal of Pervasive Computing and Communications. 12, 1, p. 23-48 26 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• A study on immune algoriths considering interaction of design with environment properties

  Miyashita, T. & Yamakawa, H., 2003 Dec 1, p. 945-950. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• A study on idea generation method for concept design using data envelopment analysis

  Satoh, D., Kobayashi, M. & Miyashita, T., 2009 Dec, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 75, 760, p. 3355-3363 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• A study on hybrid power plant system of fuel cell and li-ion battery for garbage truck

  Lee, H., Hirota, T., Ihara, Y., Yamaura, T. & Kamiya, Y., 2018 Apr 3, 2017 IEEE Vehicle Power and Propulsion Conference, VPPC 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. (2017 IEEE Vehicle Power and Propulsion Conference, VPPC 2017 - Proceedings; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on hybrid motion video coding schemes– block size, comparison of dct and vq schemes, loop filter

  Kato, Y., Okubo, S. & Suzuki, Y., 1990 Dec, In: Electronics and Communications in Japan (Part I: Communications). 73, 12, p. 45-54 10 p.

  Research output: Contribution to journal › Article › peer-review

• A STUDY ON HEXAPOD GAIT ADAPTATION BY ENUMERATIVE ENCODING AND PARTICLE SWARM OPTIMIZATION

  Parque, V., 2022, 42nd Computers and Information in Engineering Conference (CIE). American Society of Mechanical Engineers (ASME), V002T02A078. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on heredity and evolution of designs considering kansei by using genetic algorithms

  Yamakawa, H., Arakawa, M. & Katsuyama, N., 1995, 11th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention; 7th International Conference on Design Theory and Methodology; JSME Symposium on Design and Production; Mechanical Design Education and History; Computer-Integrated Concurrent Design Conference. American Society of Mechanical Engineers (ASME), p. 727-732 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on growth processes of CoNiP perpendicular magnetic anisotropy films electroless-deposited at room temperature

  Homma, T., Sezai, Y. & Osaka, T., 1997, In: Electrochimica Acta. 42, 20-22, p. 3041-3047 7 p.

  Research output: Contribution to journal › Article › peer-review
  23 Citations (Scopus)

• A study on gas seal configuration for molten carbonate fuel cells (2nd report, experimental examination of gas seal configuration)

  Nakagaki, T., Nameki, H., Hirata, H. & Hori, M., 2002 Apr, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 68, 668, p. 1273-1280 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• A study on gait recognition using LPC cepstrum for mobile terminal

  Ichino, M., Kasahara, H., Yoshii, H., Tsurumaru, K., Komatsu, N. & Katto, J., 2013 Oct 31, 2013 IEEE/ACIS 12th International Conference on Computer and Information Science, ICIS 2013 - Proceedings. p. 11-16 6 p. 6607809. (2013 IEEE/ACIS 12th International Conference on Computer and Information Science, ICIS 2013 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A Study on Gain Modulation Dynamics of 80nm-Band High-Power Raman Amplifier

  Imai, K., Morita, I., Sakata, H. & Edagawa, N., 2003, p. 158-159. 2 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• A Study on Gain Modulation Dynamics of 80nm-Band High-Power Raman Amplifier

  Imai, K., Morita, I., Sakata, H. & Edagawa, N., 2003, Optical Fiber Communication Conference, OFC 2003. Optica Publishing Group (formerly OSA), p. 158-159 2 p. TuC3. (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• A study on fundamental properties of PSP in low pressure region

  Niimi, T., Yoshida, M., Kondo, M., Oshima, Y., Mori, H., Egami, Y., Asai, K. & Nishide, H., 2002 Dec, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 68, 676, p. 3360-3368 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• A study on formation mechanisms of relief structure formed in situ on the surface of ceramics

  Zhang, W., Yamashita, S., Kumazawa, T., Ozeki, F., Hyuga, H., Norimatsu, W. & Kita, H., 2019 Dec 1, In: Ceramics International. 45, 17, p. 23143-23148 6 p.

  Research output: Contribution to journal › Article › peer-review

• A study on fingertip designs and their influences on performing stable prehension for robot hands

  Or, K., Morikuni, S., Ogasa, S., Funabashi, S., Schmitz, A. & Sugano, S., 2016 Dec 30, Humanoids 2016 - IEEE-RAS International Conference on Humanoid Robots. IEEE Computer Society, p. 772-777 6 p. 7803361

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)

• A Study on Facilities Layout (New Algorithm of Drawing “Relationship Diagram”)

  Yoshimoto, K., Hirose, A. & Mizoguchi, T., 1988, In: Transactions of the Japan Society of Mechanical Engineers Series C. 54, 499, p. 764-768 5 p.

  Research output: Contribution to journal › Article › peer-review

• A study on exploration of relationships between behaviors and mental states of learners for value co-creative education and learning environment

  Matsui, T., Horiguchi, Y., Kojima, K. & Akakura, T., 2014, Human Interface and the Management of Information: Information and Knowledge in Applications and Services - 16th International Conference, HCI International 2014, Proceedings. PART 2 ed. Springer Verlag, p. 69-79 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8522 LNCS, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• A study on evaluation of demand information-sharing methods in supply chain

  Ryu, S. J., Tsukishima, T. & Onari, H., 2009 Jul, In: International Journal of Production Economics. 120, 1, p. 162-175 14 p.

  Research output: Contribution to journal › Article › peer-review
  66 Citations (Scopus)

• A study on estimation of three-dimensional tolerances based on simulation of virtual machining in turning processes including kinematic motion deviations

  Thasana, W., Sugimura, N., Iwamura, K. & Tanimizu, Y., 2015, In: Journal of Advanced Mechanical Design, Systems and Manufacturing. 9, 1

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• A study on estimation of the deformation behavior in the collapse process of lung

  Katsuyama, Y., Yamazaki, N., Kobayashi, Y., Hoshi, T. & Miyashita, T., 2012 Dec 14, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2012. p. 2817-2822 6 p. 6346550. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• A study on estimation of 3-dimensional surface roughness of boring processes including kinematic motion deviations

  Thasana, W., Sugimura, N., Iwamura, K. & Tanimizu, Y., 2014, In: Journal of Advanced Mechanical Design, Systems and Manufacturing. 8, 4

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• A study on environmental tax for environmentally friendly products

  Nonaka, T. & Nakano, M., 2010 Nov, In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C. 76, 771, p. 2791-2796 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access