A CMOS class-G supply modulation for polar power amplifiers with high average efficiency and low ripple noise

Qing Liu*, Jiangtao Sun, Yongju Suh, Nobuyuki Itoh, Toshihiko Yoshimasu

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

In this paper, a CMOS Class-G supply modulation for polar power amplifiers with high average efficiency and low ripple noise is proposed. In the proposed Class-G supply modulation, the parallel supply modulations which are controlled by switch signals are utilized for low power and high power supplies to increase the average efficiency. A low dropout (LDO) is utilized to suppress the delta-modulated noise and provide a low ripple noise power supply. The proposed supply modulation has high efficiency at large output current as the conventional supply modulation, and it also has high efficiency and low ripple noise at the low output current. To verify the effectiveness of the proposed supply modulation, the proposed supply modulation was designed with 0.13 μm CMOS process. The simulation results show that the proposed supply modulation achieves a maximumefficiency of 85.1%. It achieves an average efficiency of 29.3% and a 7.1% improvement compared with the conventional supply modulations with Class-E power amplifier. The proposed supply modulation also shows an excellent spurious free dynamic range (SFDR) of -73 dBc for output envelope signal.

Original languageEnglish
Pages (from-to)487-497
Number of pages11
JournalIEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
VolumeE95-A
Issue number2
DOIs
Publication statusPublished - 2012 Feb

Keywords

  • Average efficiency
  • LDO
  • Power amplifier
  • RWDM
  • Supply modulation

ASJC Scopus subject areas

  • Signal Processing
  • Computer Graphics and Computer-Aided Design
  • Electrical and Electronic Engineering
  • Applied Mathematics

Fingerprint

Dive into the research topics of 'A CMOS class-G supply modulation for polar power amplifiers with high average efficiency and low ripple noise'. Together they form a unique fingerprint.

Cite this