A large current and high speed laser diode driver using switch position modification

Yun Yang; Jia Guo; Yasuaki Inoue; Hong Yu

doi:10.1109/ICCCAS.2006.285141

A large current and high speed laser diode driver using switch position modification

Yun Yang^*, Jia Guo, Yasuaki Inoue, Hong Yu

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Abstract

This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of "Switch Position Modification (SPM)", two types of LDD circuit architectures, including "Combination Switch Mode (CSM)" and "Source Follower Mode (SFM)", have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced "Switch Position Modification" idea and the proposed "Combination Switch Mode" architecture assure the high performance LDD circuit realization and signal output.

Original language	English
Title of host publication	2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings
Pages	2319-2323
Number of pages	5
Volume	4
DOIs	https://doi.org/10.1109/ICCCAS.2006.285141
Publication status	Published - 2006
Event	2006 International Conference on Communications, Circuits and Systems, ICCCAS - Guilin Duration: 2006 Jun 25 → 2006 Jun 28

Other

Other	2006 International Conference on Communications, Circuits and Systems, ICCCAS
City	Guilin
Period	06/6/25 → 06/6/28

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1109/ICCCAS.2006.285141

Cite this

Yang, Y, Guo, J, Inoue, Y & Yu, H 2006, A large current and high speed laser diode driver using switch position modification. in 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings. vol. 4, 4064388, pp. 2319-2323, 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Guilin, 06/6/25. https://doi.org/10.1109/ICCCAS.2006.285141

@inproceedings{f37235d97f11439daefb3a7048b50512,

title = "A large current and high speed laser diode driver using switch position modification",

abstract = "This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of {"}Switch Position Modification (SPM){"}, two types of LDD circuit architectures, including {"}Combination Switch Mode (CSM){"} and {"}Source Follower Mode (SFM){"}, have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced {"}Switch Position Modification{"} idea and the proposed {"}Combination Switch Mode{"} architecture assure the high performance LDD circuit realization and signal output.",

author = "Yun Yang and Jia Guo and Yasuaki Inoue and Hong Yu",

year = "2006",

doi = "10.1109/ICCCAS.2006.285141",

language = "English",

isbn = "0780395840",

volume = "4",

pages = "2319--2323",

booktitle = "2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings",

note = "2006 International Conference on Communications, Circuits and Systems, ICCCAS ; Conference date: 25-06-2006 Through 28-06-2006",

}

TY - GEN

T1 - A large current and high speed laser diode driver using switch position modification

AU - Yang, Yun

AU - Guo, Jia

AU - Inoue, Yasuaki

AU - Yu, Hong

PY - 2006

Y1 - 2006

N2 - This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of "Switch Position Modification (SPM)", two types of LDD circuit architectures, including "Combination Switch Mode (CSM)" and "Source Follower Mode (SFM)", have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced "Switch Position Modification" idea and the proposed "Combination Switch Mode" architecture assure the high performance LDD circuit realization and signal output.

AB - This paper describes how to realize the high speed laser diode driver (LDD) circuit with high performance signal and large output current to drive the laser diode device. Based on the introduced idea of "Switch Position Modification (SPM)", two types of LDD circuit architectures, including "Combination Switch Mode (CSM)" and "Source Follower Mode (SFM)", have been proposed to satisfy the output signal requirements. Under the corresponding design specification, the CSM architecture was selected to realize the effective LDD circuit design. Moreover, the signal integrity problems, such as overshoot, undershoot and slew-rate, have also been improved in the new CSM architecture. In addition, appropriate transistor size selection and circuit combination can further amend the signal waveform. The LDD circuit was realized in a 0.6-μm CMOS technology. And the output current can reach several hundred milliampere with good signal integrity in the experimental simulation results. Thus the introduced "Switch Position Modification" idea and the proposed "Combination Switch Mode" architecture assure the high performance LDD circuit realization and signal output.

UR - http://www.scopus.com/inward/record.url?scp=39749135355&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=39749135355&partnerID=8YFLogxK

U2 - 10.1109/ICCCAS.2006.285141

DO - 10.1109/ICCCAS.2006.285141

M3 - Conference contribution

AN - SCOPUS:39749135355

SN - 0780395840

SN - 9780780395848

VL - 4

SP - 2319

EP - 2323

BT - 2006 International Conference on Communications, Circuits and Systems, ICCCAS, Proceedings

T2 - 2006 International Conference on Communications, Circuits and Systems, ICCCAS

Y2 - 25 June 2006 through 28 June 2006

ER -

A large current and high speed laser diode driver using switch position modification

Abstract

Other

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this