Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application

Jiang Tao Sun; Xue Xia Yang; Toshihiko Yoshimasu; Xiao Meng Sun

doi:10.1109/ICCSC.2008.72

Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application

Jiang Tao Sun^*, Xue Xia Yang, Toshihiko Yoshimasu, Xiao Meng Sun

^*Corresponding author for this work

Graduate School of Information, Production and Systems

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

3 Citations (Scopus)

Abstract

The bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application is proposed, analyzed and measured. The high gain of 9.5 dBi can receive more power in a certain power density. And the broad beam width with 90 degrees HPBW (Half Power Beam Width) is able to avoid the precise main beam alignment. The proposed antenna still has the cross polarization level more than 30 dB, and the front-to-back ratio is about -20dB in the broadside direction. The details of the simulated and experimental results for the proposed design are presented and discussed.

Original language	English
Title of host publication	2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC
Pages	312-314
Number of pages	3
DOIs	https://doi.org/10.1109/ICCSC.2008.72
Publication status	Published - 2008
Event	2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC - Shanghai, China Duration: 2008 May 26 → 2008 May 28

Publication series

Name	2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC

Conference

Conference	2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC
Country/Territory	China
City	Shanghai
Period	08/5/26 → 08/5/28

Keywords

Bow-tie loop antenna
Broad beam width
High gain
Rectenna

ASJC Scopus subject areas

Hardware and Architecture
Control and Systems Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/ICCSC.2008.72

Cite this

Sun, J. T., Yang, X. X., Yoshimasu, T., & Sun, X. M. (2008). Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application. In 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC (pp. 312-314). Article 4536764 (2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC). https://doi.org/10.1109/ICCSC.2008.72

Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application. / Sun, Jiang Tao; Yang, Xue Xia; Yoshimasu, Toshihiko et al.
2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC. 2008. p. 312-314 4536764 (2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Sun, JT, Yang, XX, Yoshimasu, T & Sun, XM 2008, Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application. in 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC., 4536764, 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC, pp. 312-314, 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC, Shanghai, China, 08/5/26. https://doi.org/10.1109/ICCSC.2008.72

Sun JT, Yang XX, Yoshimasu T, Sun XM. Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application. In 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC. 2008. p. 312-314. 4536764. (2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC). doi: 10.1109/ICCSC.2008.72

@inproceedings{ecaca56b12884392be6b9b48d6229102,

title = "Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application",

abstract = "The bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application is proposed, analyzed and measured. The high gain of 9.5 dBi can receive more power in a certain power density. And the broad beam width with 90 degrees HPBW (Half Power Beam Width) is able to avoid the precise main beam alignment. The proposed antenna still has the cross polarization level more than 30 dB, and the front-to-back ratio is about -20dB in the broadside direction. The details of the simulated and experimental results for the proposed design are presented and discussed.",

keywords = "Bow-tie loop antenna, Broad beam width, High gain, Rectenna",

author = "Sun, {Jiang Tao} and Yang, {Xue Xia} and Toshihiko Yoshimasu and Sun, {Xiao Meng}",

year = "2008",

doi = "10.1109/ICCSC.2008.72",

language = "English",

isbn = "9781424417087",

series = "2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC",

pages = "312--314",

booktitle = "2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC",

note = "2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC ; Conference date: 26-05-2008 Through 28-05-2008",

}

TY - GEN

T1 - Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application

AU - Sun, Jiang Tao

AU - Yang, Xue Xia

AU - Yoshimasu, Toshihiko

AU - Sun, Xiao Meng

PY - 2008

Y1 - 2008

N2 - The bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application is proposed, analyzed and measured. The high gain of 9.5 dBi can receive more power in a certain power density. And the broad beam width with 90 degrees HPBW (Half Power Beam Width) is able to avoid the precise main beam alignment. The proposed antenna still has the cross polarization level more than 30 dB, and the front-to-back ratio is about -20dB in the broadside direction. The details of the simulated and experimental results for the proposed design are presented and discussed.

AB - The bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application is proposed, analyzed and measured. The high gain of 9.5 dBi can receive more power in a certain power density. And the broad beam width with 90 degrees HPBW (Half Power Beam Width) is able to avoid the precise main beam alignment. The proposed antenna still has the cross polarization level more than 30 dB, and the front-to-back ratio is about -20dB in the broadside direction. The details of the simulated and experimental results for the proposed design are presented and discussed.

KW - Bow-tie loop antenna

KW - Broad beam width

KW - High gain

KW - Rectenna

UR - http://www.scopus.com/inward/record.url?scp=50649087267&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50649087267&partnerID=8YFLogxK

U2 - 10.1109/ICCSC.2008.72

DO - 10.1109/ICCSC.2008.72

M3 - Conference contribution

AN - SCOPUS:50649087267

SN - 9781424417087

T3 - 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC

SP - 312

EP - 314

BT - 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC

T2 - 2008 4th IEEE International Conference on Circuits and Systems for Communications, ICCSC

Y2 - 26 May 2008 through 28 May 2008

ER -

Bow-tie loop printed antenna with high gain and broad beam width for 5.8GHz rectenna application

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this