Characterization of Soot Loading and Filtration Efficiency of a Gasoline Particulate Filter with Photoacoustic Sensor and Particle Number Counting Systems

An optimum operation of a gasoline particulate filter (GPF) for a gasoline direct injection vehicle in terms of its performance of pressure drop, soot loading, and filtration efficiency becomes inevitable to fulfill upcoming emission regulations. This paper proposes a methodology to characterize the GPF performance for validation of simulation models for more precise operation strategies along with future legislative requirements. The feasibility was examined through experiments of miniature GPF samples using a synthetic particle generator. Firstly, permeability of the GPF walls was estimated to be 6.9 ± 1.5 × 10⁻¹³ m² by a flow resistance descriptor model, which was in good agreement with its pore structure. Secondly, photoacoustic sensor systems indicated soot accumulation inside the GPFs in real time thanks to linear correlations between sensor signals and soot mass concentrations in exhaust. Thirdly, particle number counting systems compliant with respective regulatory technical requirements exhibited time-resolved filtration efficiencies of the GPFs in conjunction with solid particle number emissions whose diameter was larger than 10 nm and 23 nm. The filtration efficiencies at a clean state of the GPF were 0.78 and 0.77, respectively. The slight difference could be explained by Brownian diffusion and interception for particle filtration.