Conduction Properties of Chemically Deposited Polycrystalline Silicon

T. Yoshihara, A. Yasuoka, H. Abe

Research output: Contribution to journalArticlepeer-review

10 Citations (Scopus)


The relation between the conduction properties of the polycrystalline silicon films and process parameters such as the dose of implanted impurities, the deposition temperature, and heat-treatment were investigated. The doping concentration in polycrystalline silicon film was precisely controlled by ion implantation techniques. The trapping state density at the grain boundary which was the most important factor for the conduction properties of polycrystalline silicon was calculated using the doping concentration and experimentally obtained potential barrier height. It was found that the trapping state densities were 3.5 x 1012/cm2 for the boron-implanted polycrystalline silicon deposited at 700°C, and 5.2 x 1012/cm2 for the phosphorus-implanted polycrystalline silicon, respectively. The trapping state density was found to be reduced by increasing the deposition temperature or by the heat-treatment of the film at high temperature after the deposition of the polycrystalline silicon. It was also revealed that even a very small amount of oxygen caused the increase of the trapping state density.

Original languageEnglish
Pages (from-to)1603-1607
Number of pages5
JournalJournal of the Electrochemical Society
Issue number7
Publication statusPublished - 1980
Externally publishedYes


  • conduction
  • deposition
  • impurity

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Materials Chemistry
  • Electrochemistry


Dive into the research topics of 'Conduction Properties of Chemically Deposited Polycrystalline Silicon'. Together they form a unique fingerprint.

Cite this