Development of the multiple sample injector using stepwise flow to prevent sample dilution

Masaki Kanai; Shingo Ikeda; Junichi Tanaka; Jeung Sang Go; Hiroaki Nakanishi; Shuichi Shoji

Development of the multiple sample injector using stepwise flow to prevent sample dilution

Masaki Kanai^*, Shingo Ikeda, Junichi Tanaka, Jeung Sang Go, Hiroaki Nakanishi, Shuichi Shoji

^*Corresponding author for this work

School of Fundamental Science and Engineering

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

Abstract

This paper presents a concentration-conservative multiple sample injector. The stepwise flow was used to reduce dilution of the sample reagent while the reagent was injected into the sample collection outlet. By using CFD simulation, the concentration profile of the sample reagent was estimated. It was clearly shown the concentration was kept in a sample outlet. For experimental evaluation, a sample injector was fabricated and the sample injection using stepwise flow was observed by fluorescent measuring system.

Original language	English
Pages	189-192
Number of pages	4
Publication status	Published - 2003 Jul 23
Event	IEEE Sixteenth Annual International Conference on Micro Electro Mechanical Systems - Kyoto, Japan Duration: 2003 Jan 19 → 2003 Jan 23

Conference

Conference	IEEE Sixteenth Annual International Conference on Micro Electro Mechanical Systems
Country/Territory	Japan
City	Kyoto
Period	03/1/19 → 03/1/23

ASJC Scopus subject areas

Control and Systems Engineering
Mechanical Engineering
Electrical and Electronic Engineering

Cite this

@conference{eb6345d4cc7a4a8c93d8acdf632108ce,

title = "Development of the multiple sample injector using stepwise flow to prevent sample dilution",

abstract = "This paper presents a concentration-conservative multiple sample injector. The stepwise flow was used to reduce dilution of the sample reagent while the reagent was injected into the sample collection outlet. By using CFD simulation, the concentration profile of the sample reagent was estimated. It was clearly shown the concentration was kept in a sample outlet. For experimental evaluation, a sample injector was fabricated and the sample injection using stepwise flow was observed by fluorescent measuring system.",

author = "Masaki Kanai and Shingo Ikeda and Junichi Tanaka and Go, {Jeung Sang} and Hiroaki Nakanishi and Shuichi Shoji",

year = "2003",

month = jul,

day = "23",

language = "English",

pages = "189--192",

note = "IEEE Sixteenth Annual International Conference on Micro Electro Mechanical Systems ; Conference date: 19-01-2003 Through 23-01-2003",

}

TY - CONF

T1 - Development of the multiple sample injector using stepwise flow to prevent sample dilution

AU - Kanai, Masaki

AU - Ikeda, Shingo

AU - Tanaka, Junichi

AU - Go, Jeung Sang

AU - Nakanishi, Hiroaki

AU - Shoji, Shuichi

PY - 2003/7/23

Y1 - 2003/7/23

N2 - This paper presents a concentration-conservative multiple sample injector. The stepwise flow was used to reduce dilution of the sample reagent while the reagent was injected into the sample collection outlet. By using CFD simulation, the concentration profile of the sample reagent was estimated. It was clearly shown the concentration was kept in a sample outlet. For experimental evaluation, a sample injector was fabricated and the sample injection using stepwise flow was observed by fluorescent measuring system.

AB - This paper presents a concentration-conservative multiple sample injector. The stepwise flow was used to reduce dilution of the sample reagent while the reagent was injected into the sample collection outlet. By using CFD simulation, the concentration profile of the sample reagent was estimated. It was clearly shown the concentration was kept in a sample outlet. For experimental evaluation, a sample injector was fabricated and the sample injection using stepwise flow was observed by fluorescent measuring system.

UR - http://www.scopus.com/inward/record.url?scp=0038156088&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0038156088&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0038156088

SP - 189

EP - 192

T2 - IEEE Sixteenth Annual International Conference on Micro Electro Mechanical Systems

Y2 - 19 January 2003 through 23 January 2003

ER -

Development of the multiple sample injector using stepwise flow to prevent sample dilution

Abstract

Conference

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this