Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field

Tohru S. Suzuki; Tetsuo Uchikoshi; Yoshio Sakka

doi:10.1016/j.jeurceramsoc.2010.04.022

Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field

Tohru S. Suzuki^*, Tetsuo Uchikoshi, Yoshio Sakka

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

39 Citations (Scopus)

Abstract

In general, the mechanical and physical properties of a crystal depend on the direction of the crystal axis. The controlled development of the crystallographic texture in ceramics is very useful for improvement of their properties. The preparation of the textured SiC polycrystal was achieved by slip casting in a strong magnetic field. The effects of the sintering conditions and sintering additives on the degree of orientation in the SiC were investigated. The pressing during the liquid phase sintering prevented the development of a texture in the SiC prepared by slip casting in a strong magnetic field.

Original language	English
Pages (from-to)	2813-2817
Number of pages	5
Journal	Journal of the European Ceramic Society
Volume	30
Issue number	14
DOIs	https://doi.org/10.1016/j.jeurceramsoc.2010.04.022
Publication status	Published - 2010 Oct
Externally published	Yes

Keywords

Hot pressing
Magnetic field
SiC
Sintering
Slip casting

ASJC Scopus subject areas

Ceramics and Composites
Materials Chemistry

Access to Document

10.1016/j.jeurceramsoc.2010.04.022

Cite this

@article{46b3282ee84b42aead909aa51b5f3fa5,

title = "Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field",

abstract = "In general, the mechanical and physical properties of a crystal depend on the direction of the crystal axis. The controlled development of the crystallographic texture in ceramics is very useful for improvement of their properties. The preparation of the textured SiC polycrystal was achieved by slip casting in a strong magnetic field. The effects of the sintering conditions and sintering additives on the degree of orientation in the SiC were investigated. The pressing during the liquid phase sintering prevented the development of a texture in the SiC prepared by slip casting in a strong magnetic field.",

keywords = "Hot pressing, Magnetic field, SiC, Sintering, Slip casting",

author = "Suzuki, {Tohru S.} and Tetsuo Uchikoshi and Yoshio Sakka",

note = "Funding Information: The authors wish to thank Dr. Hidehiko Tanaka and Dr. Toshiyuki Nishimura of the National Institute for Materials Science for their helpful discussions, and Dr. Hideki Kakisawa for the hot pressing. This study was partially supported by the Budget for Nuclear Research and the Ministry of Education, Culture, Sports, Science and Technology , and also partially by the SHISEIDO Grants for Scientific Research and the Ishikawa Carbon Foundation .",

year = "2010",

month = oct,

doi = "10.1016/j.jeurceramsoc.2010.04.022",

language = "English",

volume = "30",

pages = "2813--2817",

journal = "Journal of the European Ceramic Society",

issn = "0955-2219",

publisher = "Elsevier BV",

number = "14",

}

TY - JOUR

T1 - Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field

AU - Suzuki, Tohru S.

AU - Uchikoshi, Tetsuo

AU - Sakka, Yoshio

N1 - Funding Information: The authors wish to thank Dr. Hidehiko Tanaka and Dr. Toshiyuki Nishimura of the National Institute for Materials Science for their helpful discussions, and Dr. Hideki Kakisawa for the hot pressing. This study was partially supported by the Budget for Nuclear Research and the Ministry of Education, Culture, Sports, Science and Technology , and also partially by the SHISEIDO Grants for Scientific Research and the Ishikawa Carbon Foundation .

PY - 2010/10

Y1 - 2010/10

N2 - In general, the mechanical and physical properties of a crystal depend on the direction of the crystal axis. The controlled development of the crystallographic texture in ceramics is very useful for improvement of their properties. The preparation of the textured SiC polycrystal was achieved by slip casting in a strong magnetic field. The effects of the sintering conditions and sintering additives on the degree of orientation in the SiC were investigated. The pressing during the liquid phase sintering prevented the development of a texture in the SiC prepared by slip casting in a strong magnetic field.

AB - In general, the mechanical and physical properties of a crystal depend on the direction of the crystal axis. The controlled development of the crystallographic texture in ceramics is very useful for improvement of their properties. The preparation of the textured SiC polycrystal was achieved by slip casting in a strong magnetic field. The effects of the sintering conditions and sintering additives on the degree of orientation in the SiC were investigated. The pressing during the liquid phase sintering prevented the development of a texture in the SiC prepared by slip casting in a strong magnetic field.

KW - Hot pressing

KW - Magnetic field

KW - SiC

KW - Sintering

KW - Slip casting

UR - http://www.scopus.com/inward/record.url?scp=77955279835&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955279835&partnerID=8YFLogxK

U2 - 10.1016/j.jeurceramsoc.2010.04.022

DO - 10.1016/j.jeurceramsoc.2010.04.022

M3 - Article

AN - SCOPUS:77955279835

SN - 0955-2219

VL - 30

SP - 2813

EP - 2817

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

IS - 14

ER -

Effect of sintering conditions on microstructure orientation in α-SiC prepared by slip casting in a strong magnetic field

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this