Abstract
A glassy carbon electrode (GCE) surface was modified with gold nanoparticles (Au NPs) via electroless deposition method. It was observed that a pristine GCE surface does not deposit Au NPs through an electroless process. However, while a GCE surface is electrochemically pretreated then sites having negative charges are generated which enables Au (III) particles to be deposited on its surface. The X-ray photoelectron spectroscopy and scanning electron microscopy were used to characterize the electrode surface. It was found that Au NPs are deposited on the GCE surface (Au-GCE) having flower like shapes. The resultant surface was employed to execute electrocatalytic oxygen reduction reactions (ORR). By analyzing hydrodynamic voltammograms, it was confirmed that ORR undergoes a 2e−transfer pathway and H2O2 is generated on the Au-GCE surface having a standard rate constant (ko) of 5.48 × 10−9 cm s−1 at +0.05 V vs. Ag/AgCl (sat. KCl) in 0.1 M H2SO4. The in-situ generated H2O2 can degrade methylene blue (MB) via Electro-Fenton process. The MB degradation was found to match well with the 1st order kinetic model with a homogeneous rate constant of 4.36 ×10−3 min-1.
Original language | English |
---|---|
Article number | 136966 |
Journal | Electrochimica Acta |
Volume | 360 |
DOIs | |
Publication status | Published - 2020 Nov 10 |
Externally published | Yes |
Keywords
- Electro-Fenton process
- Electro-kinetics
- Electroless Au deposition
- Methylene blue degradation
- Oxygen reduction reaction
ASJC Scopus subject areas
- Chemical Engineering(all)
- Electrochemistry