Equal-channel angular extrusion process of lotus-type porous copper

S. Suzuki*, H. Utsunomiya, H. Nakajima

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

20 Citations (Scopus)


Deformation behavior of lotus-type porous copper with long cylindrical pores aligned in one direction through equal-channel angular extrusion (ECAE) process was investigated using dies with channel angles 90° and 150°. The lotus-copper rod was densified by the uni-axial compression in the entry channel, and the pores were thinned and elongated by shearing at the corner of the 90°-die. The inclination angle of the elongated thinned pores can be explained by a geometric deformation model considering the densification. After the second path of the ECAE the pores were either further thinned and elongated or opened again according to the pass route. Extrusion through the 150°-die changed the pore morphologies little. The Vickers hardness increased through the ECAE process. From these results we found that it may be possible to improve the mechanical properties of porous metals and to control the pore morphology by means of the ECAE process.

Original languageEnglish
Pages (from-to)465-470
Number of pages6
JournalMaterials Science and Engineering: A
Issue number1-2
Publication statusPublished - 2008 Aug 25
Externally publishedYes


  • Densification
  • Equal-channel angular extrusion
  • Lotus-type porous copper
  • Porous metals
  • Vickers hardness

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering


Dive into the research topics of 'Equal-channel angular extrusion process of lotus-type porous copper'. Together they form a unique fingerprint.

Cite this