Fabrication of flexible pressure sensor using carbon black/pdms

Siti Nursyahirah Binti Abdul Hadi; Mohd Nizar Bin Hamidon; Saman Azhari

doi:10.1109/SCORED.2017.8305430

Fabrication of flexible pressure sensor using carbon black/pdms

Siti Nursyahirah Binti Abdul Hadi, Mohd Nizar Bin Hamidon, Saman Azhari

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Despite the fact of the technology has advanced, the fabrication of flexible pressure sensor still uses material that can bring harm to the environment. Therefore, this project is done to research on method that used more eco-friendly materials for the fabrication process on paste preparation while maintaining its performance in term of resistivity and conductivity by fabricating the flexible pressure sensor using Carbon Black/PDMS. Three flexible pressure sensors with different electrode designs were fabricated on the same substrate which is Kapton Film. The resistance of the three sensors was measured and resistivity and conductivity were extracted. Later two types of graphs were plotted for each sensor: The resistivity and conductivity of the sensors were analysed.

Original language	English
Title of host publication	IEEE Student Conference on Research and Development
Subtitle of host publication	Inspiring Technology for Humanity, SCOReD 2017 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	7-12
Number of pages	6
ISBN (Electronic)	9781538621264
DOIs	https://doi.org/10.1109/SCORED.2017.8305430
Publication status	Published - 2017 Jul 2
Externally published	Yes
Event	15th IEEE Student Conference on Research and Development, SCOReD 2017 - Putrajaya, Malaysia Duration: 2017 Dec 13 → 2017 Dec 14

Publication series

Name	IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings
Volume	2018-January

Conference

Conference	15th IEEE Student Conference on Research and Development, SCOReD 2017
Country/Territory	Malaysia
City	Putrajaya
Period	17/12/13 → 17/12/14

Keywords

Conductivity
Electrode design
Hysteresis loop
Piezoresistive
Thick film method

ASJC Scopus subject areas

Energy Engineering and Power Technology
Renewable Energy, Sustainability and the Environment
Electrical and Electronic Engineering
Electronic, Optical and Magnetic Materials
Instrumentation

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/SCORED.2017.8305430

Cite this

Hadi, S. N. B. A., Hamidon, M. N. B., & Azhari, S. (2017). Fabrication of flexible pressure sensor using carbon black/pdms. In IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings (pp. 7-12). (IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings; Vol. 2018-January). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SCORED.2017.8305430

Fabrication of flexible pressure sensor using carbon black/pdms. / Hadi, Siti Nursyahirah Binti Abdul; Hamidon, Mohd Nizar Bin; Azhari, Saman.
IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2017. p. 7-12 (IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings; Vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Hadi, SNBA, Hamidon, MNB & Azhari, S 2017, Fabrication of flexible pressure sensor using carbon black/pdms. in IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings. IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings, vol. 2018-January, Institute of Electrical and Electronics Engineers Inc., pp. 7-12, 15th IEEE Student Conference on Research and Development, SCOReD 2017, Putrajaya, Malaysia, 17/12/13. https://doi.org/10.1109/SCORED.2017.8305430

Hadi SNBA, Hamidon MNB, Azhari S. Fabrication of flexible pressure sensor using carbon black/pdms. In IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2017. p. 7-12. (IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings). doi: 10.1109/SCORED.2017.8305430

Hadi, Siti Nursyahirah Binti Abdul ; Hamidon, Mohd Nizar Bin ; Azhari, Saman. / Fabrication of flexible pressure sensor using carbon black/pdms. IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2017. pp. 7-12 (IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings).

@inproceedings{7b19df1413144200b1e452676aa7b3a1,

title = "Fabrication of flexible pressure sensor using carbon black/pdms",

abstract = "Despite the fact of the technology has advanced, the fabrication of flexible pressure sensor still uses material that can bring harm to the environment. Therefore, this project is done to research on method that used more eco-friendly materials for the fabrication process on paste preparation while maintaining its performance in term of resistivity and conductivity by fabricating the flexible pressure sensor using Carbon Black/PDMS. Three flexible pressure sensors with different electrode designs were fabricated on the same substrate which is Kapton Film. The resistance of the three sensors was measured and resistivity and conductivity were extracted. Later two types of graphs were plotted for each sensor: The resistivity and conductivity of the sensors were analysed.",

keywords = "Conductivity, Electrode design, Hysteresis loop, Piezoresistive, Thick film method",

author = "Hadi, {Siti Nursyahirah Binti Abdul} and Hamidon, {Mohd Nizar Bin} and Saman Azhari",

note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 15th IEEE Student Conference on Research and Development, SCOReD 2017 ; Conference date: 13-12-2017 Through 14-12-2017",

year = "2017",

month = jul,

day = "2",

doi = "10.1109/SCORED.2017.8305430",

language = "English",

series = "IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "7--12",

booktitle = "IEEE Student Conference on Research and Development",

}

TY - GEN

T1 - Fabrication of flexible pressure sensor using carbon black/pdms

AU - Hadi, Siti Nursyahirah Binti Abdul

AU - Hamidon, Mohd Nizar Bin

AU - Azhari, Saman

PY - 2017/7/2

Y1 - 2017/7/2

N2 - Despite the fact of the technology has advanced, the fabrication of flexible pressure sensor still uses material that can bring harm to the environment. Therefore, this project is done to research on method that used more eco-friendly materials for the fabrication process on paste preparation while maintaining its performance in term of resistivity and conductivity by fabricating the flexible pressure sensor using Carbon Black/PDMS. Three flexible pressure sensors with different electrode designs were fabricated on the same substrate which is Kapton Film. The resistance of the three sensors was measured and resistivity and conductivity were extracted. Later two types of graphs were plotted for each sensor: The resistivity and conductivity of the sensors were analysed.

AB - Despite the fact of the technology has advanced, the fabrication of flexible pressure sensor still uses material that can bring harm to the environment. Therefore, this project is done to research on method that used more eco-friendly materials for the fabrication process on paste preparation while maintaining its performance in term of resistivity and conductivity by fabricating the flexible pressure sensor using Carbon Black/PDMS. Three flexible pressure sensors with different electrode designs were fabricated on the same substrate which is Kapton Film. The resistance of the three sensors was measured and resistivity and conductivity were extracted. Later two types of graphs were plotted for each sensor: The resistivity and conductivity of the sensors were analysed.

KW - Conductivity

KW - Electrode design

KW - Hysteresis loop

KW - Piezoresistive

KW - Thick film method

UR - http://www.scopus.com/inward/record.url?scp=85048884145&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048884145&partnerID=8YFLogxK

U2 - 10.1109/SCORED.2017.8305430

DO - 10.1109/SCORED.2017.8305430

M3 - Conference contribution

AN - SCOPUS:85048884145

T3 - IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings

SP - 7

EP - 12

BT - IEEE Student Conference on Research and Development

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 15th IEEE Student Conference on Research and Development, SCOReD 2017

Y2 - 13 December 2017 through 14 December 2017

ER -

Fabrication of flexible pressure sensor using carbon black/pdms

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this