The influence of structural parameters, including the Schottky barrier height for electron (Bn) and channel doping (Na), on the electrical characteristics of a scaled Schottky barrier tunneling FET (SBTFET) have been clarified by numerical device simulation. The thermionic emission current (ITH) as well as the tunneling current (ITN) have been considered as the main electron injections at the source edge. Simulation results have revealed that the main conduction is ITN in the region near and above the threshold voltage (Vth). As tunneling probability is determined by Bn and the width of the triangular potential barrier at the source edge, a lower Bn with higher Na results in a better subthreshold swing (SS) with high on-state drive current (ION) at a gate length (Lg) of 50 nm. With Lg scaling down to 10 nm, however, a lower Bn has shown an increased offstate leakage current (IOFF) due to the short-channel effect (SCE), while a larger Bn can suppress the IOFF at the cost of ION. Therefore, considering SS with ION and IOFF ratio, it can be concluded that an optimum Bn exists for short-channel devices. The SBTFET showed good subthreshold performance and higher ION=IOFF than the conventional silicon-on-insulator (SOI) MOSFET in 10nm region with the Schottky barrier height optimization.
ASJC Scopus subject areas
- General Engineering
- General Physics and Astronomy