Isotope analysis of diamond-surface passivation effect of high-temperature H2O-grown atomic layer deposition-Al2O3 films

Atsushi Hiraiwa, Tatsuya Saito, Daisuke Matsumura, Hiroshi Kawarada

Research output: Contribution to journalArticlepeer-review

31 Citations (Scopus)


The Al2O3 film formed using an atomic layer deposition (ALD) method with trimethylaluminum as Al precursor and H2O as oxidant at a high temperature (450-°C) effectively passivates the p-type surface conduction (SC) layer specific to a hydrogen-terminated diamond surface, leading to a successful operation of diamond SC field-effect transistors at 400-°C. In order to investigate this excellent passivation effect, we carried out an isotope analysis using D2O instead of H2O in the ALD and found that the Al2O3 film formed at a conventional temperature (100-°C) incorporates 50 times more CH3 groups than the high-temperature film. This CH3 is supposed to dissociate from the film when heated afterwards at a higher temperature (550-°C) and causes peeling patterns on the H-terminated surface. The high-temperature film is free from this problem and has the largest mass density and dielectric constant among those investigated in this study. The isotope analysis also unveiled a relatively active H-exchange reaction between the diamond H-termination and H2O oxidant during the high-temperature ALD, the SC still being kept intact. This dynamic and yet steady H termination is realized by the suppressed oxidation due to the endothermic reaction with H2O. Additionally, we not only observed the kinetic isotope effect in the form of reduced growth rate of D2O-oxidant ALD but found that the mass density and dielectric constant of D2O-grown Al2O3 films are smaller than those of H2O-grown films. This is a new type of isotope effect, which is not caused by the presence of isotopes in the films unlike the traditional isotope effects that originate from the presence of isotopes itself. Hence, the high-temperature ALD is very effective in forming Al2O3 films as a passivation and/or gate-insulation layer of high-temperature-operation diamond SC devices, and the knowledge of the aforementioned new isotope effect will be a basis for further enhancing ALD technologies in general.

Original languageEnglish
Article number215304
JournalJournal of Applied Physics
Issue number21
Publication statusPublished - 2015 Jun 7

ASJC Scopus subject areas

  • General Physics and Astronomy


Dive into the research topics of 'Isotope analysis of diamond-surface passivation effect of high-temperature H2O-grown atomic layer deposition-Al2O3 films'. Together they form a unique fingerprint.

Cite this