Modeling and simulation of closed-loop supply chains considering economic efficiency

Yoshitaka Tanimizu; Yusuke Shimizu; Koji Iwamura; Nobuhiro Sugimura

doi:10.1007/978-3-642-41266-0_55

Modeling and simulation of closed-loop supply chains considering economic efficiency

Yoshitaka Tanimizu, Yusuke Shimizu, Koji Iwamura, Nobuhiro Sugimura

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Abstract

This study proposes a basic model of closed-loop supply chains which includes not only traditional forward supply chains for the generation of products but also reverse supply chains for the reuse of products in consideration of economic efficiency for MTO (Make to Order) companies. The model consists of four model components, i.e., clients, manufacturers, suppliers, and remanufacturers. A remanufacturer is added to the previous model of forward supply chains as a new model component which collects used products from clients and provides reusable parts to manufacturers. Remanufacturers as well as manufacturers and suppliers modify their schedules and negotiate with each other in order to determine suitable prices and delivery times of products. Remanufacturers stimulate clients to discard used products to meet the demand of reusable parts. They can increase the amount of reused products and reduce wastes by creating a balance between supply and demand of reusable parts.

Original language	English
Title of host publication	Advances in Production Management Systems
Subtitle of host publication	Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings
Editors	Vittal Prabhu, Marco Taisch, Dimitris Kiritsis
Publisher	Springer New York LLC
Pages	461-468
Number of pages	8
ISBN (Electronic)	9783642412653
DOIs	https://doi.org/10.1007/978-3-642-41266-0_55
Publication status	Published - 2013
Externally published	Yes
Event	IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2013 - State College, United States Duration: 2013 Sept 9 → 2013 Sept 12

Publication series

Name	IFIP Advances in Information and Communication Technology
Volume	414
ISSN (Print)	1868-4238
ISSN (Electronic)	1868-422X

Other

Other	IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2013
Country/Territory	United States
City	State College
Period	13/9/9 → 13/9/12

Keywords

Closed-loop supply chain
Genetic algorithm
Negotiation
Reverse supply chain
Scheduling

ASJC Scopus subject areas

Information Systems
Computer Networks and Communications
Information Systems and Management

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1007/978-3-642-41266-0_55

Cite this

Tanimizu, Y., Shimizu, Y., Iwamura, K., & Sugimura, N. (2013). Modeling and simulation of closed-loop supply chains considering economic efficiency. In V. Prabhu, M. Taisch, & D. Kiritsis (Eds.), Advances in Production Management Systems: Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings (pp. 461-468). (IFIP Advances in Information and Communication Technology; Vol. 414). Springer New York LLC. https://doi.org/10.1007/978-3-642-41266-0_55

Modeling and simulation of closed-loop supply chains considering economic efficiency. / Tanimizu, Yoshitaka; Shimizu, Yusuke; Iwamura, Koji et al.
Advances in Production Management Systems: Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings. ed. / Vittal Prabhu; Marco Taisch; Dimitris Kiritsis. Springer New York LLC, 2013. p. 461-468 (IFIP Advances in Information and Communication Technology; Vol. 414).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Tanimizu, Y, Shimizu, Y, Iwamura, K & Sugimura, N 2013, Modeling and simulation of closed-loop supply chains considering economic efficiency. in V Prabhu, M Taisch & D Kiritsis (eds), Advances in Production Management Systems: Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings. IFIP Advances in Information and Communication Technology, vol. 414, Springer New York LLC, pp. 461-468, IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2013, State College, United States, 13/9/9. https://doi.org/10.1007/978-3-642-41266-0_55

Tanimizu Y, Shimizu Y, Iwamura K, Sugimura N. Modeling and simulation of closed-loop supply chains considering economic efficiency. In Prabhu V, Taisch M, Kiritsis D, editors, Advances in Production Management Systems: Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings. Springer New York LLC. 2013. p. 461-468. (IFIP Advances in Information and Communication Technology). doi: 10.1007/978-3-642-41266-0_55

Tanimizu, Yoshitaka ; Shimizu, Yusuke ; Iwamura, Koji et al. / Modeling and simulation of closed-loop supply chains considering economic efficiency. Advances in Production Management Systems: Sustainable Production and Service Supply Chains - IFIP WG 5.7 International Conference, APMS 2013, Proceedings. editor / Vittal Prabhu ; Marco Taisch ; Dimitris Kiritsis. Springer New York LLC, 2013. pp. 461-468 (IFIP Advances in Information and Communication Technology).

@inproceedings{532dc96846184be39466a3a3a666929f,

title = "Modeling and simulation of closed-loop supply chains considering economic efficiency",

abstract = "This study proposes a basic model of closed-loop supply chains which includes not only traditional forward supply chains for the generation of products but also reverse supply chains for the reuse of products in consideration of economic efficiency for MTO (Make to Order) companies. The model consists of four model components, i.e., clients, manufacturers, suppliers, and remanufacturers. A remanufacturer is added to the previous model of forward supply chains as a new model component which collects used products from clients and provides reusable parts to manufacturers. Remanufacturers as well as manufacturers and suppliers modify their schedules and negotiate with each other in order to determine suitable prices and delivery times of products. Remanufacturers stimulate clients to discard used products to meet the demand of reusable parts. They can increase the amount of reused products and reduce wastes by creating a balance between supply and demand of reusable parts.",

keywords = "Closed-loop supply chain, Genetic algorithm, Negotiation, Reverse supply chain, Scheduling",

author = "Yoshitaka Tanimizu and Yusuke Shimizu and Koji Iwamura and Nobuhiro Sugimura",

note = "Publisher Copyright: {\textcopyright} IFIP International Federation for Information Processing 2013.; IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2013 ; Conference date: 09-09-2013 Through 12-09-2013",

year = "2013",

doi = "10.1007/978-3-642-41266-0_55",

language = "English",

series = "IFIP Advances in Information and Communication Technology",

publisher = "Springer New York LLC",

pages = "461--468",

editor = "Vittal Prabhu and Marco Taisch and Dimitris Kiritsis",

booktitle = "Advances in Production Management Systems",

}

TY - GEN

T1 - Modeling and simulation of closed-loop supply chains considering economic efficiency

AU - Tanimizu, Yoshitaka

AU - Shimizu, Yusuke

AU - Iwamura, Koji

AU - Sugimura, Nobuhiro

N1 - Publisher Copyright: © IFIP International Federation for Information Processing 2013.

PY - 2013

Y1 - 2013

N2 - This study proposes a basic model of closed-loop supply chains which includes not only traditional forward supply chains for the generation of products but also reverse supply chains for the reuse of products in consideration of economic efficiency for MTO (Make to Order) companies. The model consists of four model components, i.e., clients, manufacturers, suppliers, and remanufacturers. A remanufacturer is added to the previous model of forward supply chains as a new model component which collects used products from clients and provides reusable parts to manufacturers. Remanufacturers as well as manufacturers and suppliers modify their schedules and negotiate with each other in order to determine suitable prices and delivery times of products. Remanufacturers stimulate clients to discard used products to meet the demand of reusable parts. They can increase the amount of reused products and reduce wastes by creating a balance between supply and demand of reusable parts.

AB - This study proposes a basic model of closed-loop supply chains which includes not only traditional forward supply chains for the generation of products but also reverse supply chains for the reuse of products in consideration of economic efficiency for MTO (Make to Order) companies. The model consists of four model components, i.e., clients, manufacturers, suppliers, and remanufacturers. A remanufacturer is added to the previous model of forward supply chains as a new model component which collects used products from clients and provides reusable parts to manufacturers. Remanufacturers as well as manufacturers and suppliers modify their schedules and negotiate with each other in order to determine suitable prices and delivery times of products. Remanufacturers stimulate clients to discard used products to meet the demand of reusable parts. They can increase the amount of reused products and reduce wastes by creating a balance between supply and demand of reusable parts.

KW - Closed-loop supply chain

KW - Genetic algorithm

KW - Negotiation

KW - Reverse supply chain

KW - Scheduling

UR - http://www.scopus.com/inward/record.url?scp=84906929382&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84906929382&partnerID=8YFLogxK

U2 - 10.1007/978-3-642-41266-0_55

DO - 10.1007/978-3-642-41266-0_55

M3 - Conference contribution

AN - SCOPUS:84906929382

T3 - IFIP Advances in Information and Communication Technology

SP - 461

EP - 468

BT - Advances in Production Management Systems

A2 - Prabhu, Vittal

A2 - Taisch, Marco

A2 - Kiritsis, Dimitris

PB - Springer New York LLC

T2 - IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2013

Y2 - 9 September 2013 through 12 September 2013

ER -

Modeling and simulation of closed-loop supply chains considering economic efficiency

Abstract

Publication series

Other

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this