Temperature distribution in teeth and blanks of ultra high-speed gears (1st report, measurement of temperature distribution in teeth and blanks)

Susumu Matsumoto; Yasuyoshi Tozaki; Masatoshi Fukutomi

doi:10.1299/jsmec.44.203

Temperature distribution in teeth and blanks of ultra high-speed gears (1st report, measurement of temperature distribution in teeth and blanks)

Susumu Matsumoto, Yasuyoshi Tozaki^*, Masatoshi Fukutomi

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

The purpose of this study are to ensure reliability of the power transmission gears, and to predict operating condition of high speed gears especially with regard to temperature distribution in teeth and blanks. The experiments were carried out using power circulating gear testing machine (1 100 kW) under ultra high pitch line velocity (~150 m/s) and temperature distribution in teeth and blanks were measured. By the experiments, the following facts are known. By increasing line velocity, the temperature of teeth increase parabolically and the distribution of bending stress become nonuniform along face width.

Original language	English
Pages (from-to)	203-209
Number of pages	7
Journal	JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing
Volume	44
Issue number	1
DOIs	https://doi.org/10.1299/jsmec.44.203
Publication status	Published - 2001

Keywords

Bending
Gear
Machine element
Measurement
Temperature distribution

ASJC Scopus subject areas

Industrial and Manufacturing Engineering
Mechanical Engineering

Access to Document

10.1299/jsmec.44.203

Cite this

Temperature distribution in teeth and blanks of ultra high-speed gears (1st report, measurement of temperature distribution in teeth and blanks). / Matsumoto, Susumu; Tozaki, Yasuyoshi; Fukutomi, Masatoshi.
In: JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing, Vol. 44, No. 1, 2001, p. 203-209.

Research output: Contribution to journal › Article › peer-review

@article{030e718ea17b41e9b3940842747b3a5f,

title = "Temperature distribution in teeth and blanks of ultra high-speed gears (1st report, measurement of temperature distribution in teeth and blanks)",

abstract = "The purpose of this study are to ensure reliability of the power transmission gears, and to predict operating condition of high speed gears especially with regard to temperature distribution in teeth and blanks. The experiments were carried out using power circulating gear testing machine (1 100 kW) under ultra high pitch line velocity (~150 m/s) and temperature distribution in teeth and blanks were measured. By the experiments, the following facts are known. By increasing line velocity, the temperature of teeth increase parabolically and the distribution of bending stress become nonuniform along face width.",

keywords = "Bending, Gear, Machine element, Measurement, Temperature distribution",

author = "Susumu Matsumoto and Yasuyoshi Tozaki and Masatoshi Fukutomi",

year = "2001",

doi = "10.1299/jsmec.44.203",

language = "English",

volume = "44",

pages = "203--209",

journal = "JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing",

issn = "1344-7653",

publisher = "Japan Society of Mechanical Engineers",

number = "1",

}

TY - JOUR

T1 - Temperature distribution in teeth and blanks of ultra high-speed gears (1st report, measurement of temperature distribution in teeth and blanks)

AU - Matsumoto, Susumu

AU - Tozaki, Yasuyoshi

AU - Fukutomi, Masatoshi

PY - 2001

Y1 - 2001

N2 - The purpose of this study are to ensure reliability of the power transmission gears, and to predict operating condition of high speed gears especially with regard to temperature distribution in teeth and blanks. The experiments were carried out using power circulating gear testing machine (1 100 kW) under ultra high pitch line velocity (~150 m/s) and temperature distribution in teeth and blanks were measured. By the experiments, the following facts are known. By increasing line velocity, the temperature of teeth increase parabolically and the distribution of bending stress become nonuniform along face width.

AB - The purpose of this study are to ensure reliability of the power transmission gears, and to predict operating condition of high speed gears especially with regard to temperature distribution in teeth and blanks. The experiments were carried out using power circulating gear testing machine (1 100 kW) under ultra high pitch line velocity (~150 m/s) and temperature distribution in teeth and blanks were measured. By the experiments, the following facts are known. By increasing line velocity, the temperature of teeth increase parabolically and the distribution of bending stress become nonuniform along face width.

KW - Bending

KW - Gear

KW - Machine element

KW - Measurement

KW - Temperature distribution

UR - http://www.scopus.com/inward/record.url?scp=0034837157&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034837157&partnerID=8YFLogxK

U2 - 10.1299/jsmec.44.203

DO - 10.1299/jsmec.44.203

M3 - Article

AN - SCOPUS:0034837157

SN - 1344-7653

VL - 44

SP - 203

EP - 209

JO - JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing

JF - JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing

IS - 1

ER -

Temperature distribution in teeth and blanks of ultra high-speed gears (1st report, measurement of temperature distribution in teeth and blanks)

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this