Vibration Analysis of Multistage Gear System Including Drive Mechanism Elements (2nd Report, Frequency Response Analysis of Helical Gear System)

Eiichirou Tanaka; Naoyuki Tanaka; Kousaku Ohno

doi:10.1299/kikaic.66.1967

Vibration Analysis of Multistage Gear System Including Drive Mechanism Elements (2nd Report, Frequency Response Analysis of Helical Gear System)

Eiichirou Tanaka^*, Naoyuki Tanaka, Kousaku Ohno

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

An analysis method to predict the 3-dimensional vibration behavior of a multistage helical gear system is proposed. The method considers 6-degrees of freedom for each gear and introduces variables indicating the tooth deflection and the torsional angle between drive mechanism elements, i.e., couplings and a motor. The calculated and measured results for the helical gears and the torsional vibration of drive mechanism elements were compared. The calculated eigen frequencies and vibration responses agreed well with the experimental results. The usefulness of this method was shown.

Original language	English
Pages (from-to)	1967-1974
Number of pages	8
Journal	Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume	66
Issue number	646
DOIs	https://doi.org/10.1299/kikaic.66.1967
Publication status	Published - 2000
Externally published	Yes

Keywords

Coupled Vibration
Gear
Modelling
Multistage Gear
Tortional Vibration
Vibration of Mechanism

ASJC Scopus subject areas

Mechanics of Materials
Mechanical Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1299/kikaic.66.1967

Cite this

Vibration Analysis of Multistage Gear System Including Drive Mechanism Elements (2nd Report, Frequency Response Analysis of Helical Gear System). / Tanaka, Eiichirou; Tanaka, Naoyuki; Ohno, Kousaku.
In: Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, Vol. 66, No. 646, 2000, p. 1967-1974.

Research output: Contribution to journal › Article › peer-review

@article{8509da2f847d4c9e89659e4a6e01601e,

title = "Vibration Analysis of Multistage Gear System Including Drive Mechanism Elements (2nd Report, Frequency Response Analysis of Helical Gear System)",

abstract = "An analysis method to predict the 3-dimensional vibration behavior of a multistage helical gear system is proposed. The method considers 6-degrees of freedom for each gear and introduces variables indicating the tooth deflection and the torsional angle between drive mechanism elements, i.e., couplings and a motor. The calculated and measured results for the helical gears and the torsional vibration of drive mechanism elements were compared. The calculated eigen frequencies and vibration responses agreed well with the experimental results. The usefulness of this method was shown.",

keywords = "Coupled Vibration, Gear, Modelling, Multistage Gear, Tortional Vibration, Vibration of Mechanism",

author = "Eiichirou Tanaka and Naoyuki Tanaka and Kousaku Ohno",

year = "2000",

doi = "10.1299/kikaic.66.1967",

language = "English",

volume = "66",

pages = "1967--1974",

journal = "Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C",

issn = "0387-5024",

publisher = "Japan Society of Mechanical Engineers",

number = "646",

}

TY - JOUR

T1 - Vibration Analysis of Multistage Gear System Including Drive Mechanism Elements (2nd Report, Frequency Response Analysis of Helical Gear System)

AU - Tanaka, Eiichirou

AU - Tanaka, Naoyuki

AU - Ohno, Kousaku

PY - 2000

Y1 - 2000

N2 - An analysis method to predict the 3-dimensional vibration behavior of a multistage helical gear system is proposed. The method considers 6-degrees of freedom for each gear and introduces variables indicating the tooth deflection and the torsional angle between drive mechanism elements, i.e., couplings and a motor. The calculated and measured results for the helical gears and the torsional vibration of drive mechanism elements were compared. The calculated eigen frequencies and vibration responses agreed well with the experimental results. The usefulness of this method was shown.

AB - An analysis method to predict the 3-dimensional vibration behavior of a multistage helical gear system is proposed. The method considers 6-degrees of freedom for each gear and introduces variables indicating the tooth deflection and the torsional angle between drive mechanism elements, i.e., couplings and a motor. The calculated and measured results for the helical gears and the torsional vibration of drive mechanism elements were compared. The calculated eigen frequencies and vibration responses agreed well with the experimental results. The usefulness of this method was shown.

KW - Coupled Vibration

KW - Gear

KW - Modelling

KW - Multistage Gear

KW - Tortional Vibration

KW - Vibration of Mechanism

UR - http://www.scopus.com/inward/record.url?scp=0345512183&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0345512183&partnerID=8YFLogxK

U2 - 10.1299/kikaic.66.1967

DO - 10.1299/kikaic.66.1967

M3 - Article

AN - SCOPUS:0345512183

SN - 0387-5024

VL - 66

SP - 1967

EP - 1974

JO - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

JF - Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C

IS - 646

ER -

Vibration Analysis of Multistage Gear System Including Drive Mechanism Elements (2nd Report, Frequency Response Analysis of Helical Gear System)

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this