年別の研究成果
年別の研究成果
検索結果
-
Fabrication of aluminum borate whisker reinforced AZ91D magnesium alloy composites by semi-solid process and their mechanical properties
Yoshida, M., Takeuchi, S., Pan, J., Sasaki, G., Fuyama, N., Fujii, T. & Fukunaga, H., 2001 1月 1, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 10, 2-3, p. 255-263 9 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Fabrication of continuous carbon fiber-reinforced aluminum-magnesium alloy composite wires using ultrasonic infiltration method
Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2007 8月 1, In: Composites Part A: Applied Science and Manufacturing. 38, 8, p. 1902-1911 10 p.研究成果: Article › 査読
81 被引用数 (Scopus) -
Fabrication Process and Evaluation of the Sintered SiC Fiber Reinforced SiO2-Mullite Composites
Nagahisa, K., Iwamoto, K., Shinozaki, K., Fukunaga, H., Sasaki, G. & Yoshida, M., 2004 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 68, 2, p. 162-171 10 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting
Uozumi, H., Kobayashi, K., Nakanishi, K., Matsunaga, T., Shinozaki, K., Sakamoto, H., Tsukada, T., Masuda, C. & Yoshida, M., 2008 11月 15, In: Materials Science and Engineering A. 495, 1-2, p. 282-287 6 p.研究成果: Article › 査読
141 被引用数 (Scopus) -
Formation behavior of acoustic cavitation in molten aluminum alloys under ultrasonic vibration
Matsunaga, T., Ogata, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2006 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 4, p. 214-220 7 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Grain refinement effects on the strain rate sensitivity and grain boundary sliding in partially solidified Al-5 wt%Mg alloy
Takai, R., Kimura, S., Kashiuchi, R., Kotaki, H. & Yoshida, M., 2016 6月 14, In: Materials Science and Engineering A. 667, p. 417-425 9 p.研究成果: Article › 査読
28 被引用数 (Scopus) -
Hot tearing prediction of casting via thermal stress analysis
Takai, R. & Yoshida, M., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 8, p. 400-409 10 p.研究成果: Article › 査読
Open Access -
Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 1)
Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 1, p. 23-32 10 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 2)
Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 2, p. 79-90 12 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
HREM and EDS analysis of sintered SiC fibre reinforced MAS glass composites
Nagahisa, K., Yoshida, M., Abe, E., Fukunaga, H. & Sasaki, G., 2002, In: Journal of Electron Microscopy. 51, SUPPL., p. S159-S164研究成果: Article › 査読
-
Image-based modeling of viscoelastic properties of solidifying Al alloys and model validation
Matsushita, A., Mizuno, H., Okane, T. & Yoshida, M., 2019 1月 1, In: Journal of Materials Processing Technology. 263, p. 321-329 9 p.研究成果: Article › 査読
7 被引用数 (Scopus) -
Infiltration mechanism of molten aluminum alloys into bundle of carbon fibers using ultrasonic infiltration method
Matsunaga, T., Ogata, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2006 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 4, p. 226-232 7 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Influence of abnormal structure on the reliability of squeeze castings
Kimura, R., Yoshida, M., Sasaki, G., Pan, J. & Fukunaga, H., 2002 12月 20, In: Journal of Materials Processing Technology. 130-131, p. 299-303 5 p.研究成果: Article › 査読
26 被引用数 (Scopus) -
Influence of compressive pre-strain on tensile fatigue life in carbon steel S45C
Tamaki, H., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 11月 1, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 11, p. 503-508 6 p.研究成果: Article › 査読
-
Influence of gravity on the microstructure of directionally solidified Ag-Si eutectic alloy
Aoi, I., Yoshida, M., Fukunaga, H. & Nakae, H., 1999 1月, In: Materials Transactions, JIM. 40, 1, p. 27-33 7 p.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
Influence of gravity on the microstructure of directionally solidified Al-In monotectic alloy
Yoshida, M., Murao, S., Aoi, I. & Nakae, H., 1998, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 62, 1, p. 85-91 7 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Influence of growth direction on the microstructure of unidirectionally solidified Cu-Pb monotectic alloy using zone-melt technique
Aoi, I., Ishino, M., Yoshida, M., Fukunaga, H. & Nakae, H., 2001 2月, In: Journal of Crystal Growth. 222, 4, p. 806-815 10 p.研究成果: Article › 査読
17 被引用数 (Scopus) -
Influence of high temperature holding on tensile strength of pan-based carbon fiber reinforced aluminum-magnesium alloy composites fabricated by ultrasonic infiltration method
Yamaguchi, S., Mikuni, J., Mizoguchi, I., Matsunaga, T., Shinozaki, K. & Yoshida, M., 2009 5月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 5, p. 241-247 7 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Influence of high temperature holding on tensile strength of pitch-based carbon fiber reinforced Al-Mg alloy composites fabricated by ultrasonic infiltration method
Mizoguchi, I., Yamaguchi, S., Yachi, S. & Yoshida, M., 2010, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 8, p. 396-402 7 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Influence of interfacial chemical reaction for tensile strength of carbon fiber reinforced aluminum-magnesium alloy composites fabricated by ultrasonic infiltration method
Mikuni, J., Nonokawa, K., Matsunaga, T., Shinozaki, K. & Yoshida, M., 2008 1月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 58, 1, p. 27-32 6 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Influence of laser surface melting condition on intergranular corrosion resistance in type 316 stainless steel
Muto, K., Furukawa, M., Sakai, J. N. I. & Yoshida, M., 2009 5月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 73, 5, p. 340-345 6 p.研究成果: Article › 査読
Open Access -
Influence of melting temperature on morphology of primary mullite in SiO2-Al2O3 system
Nakae, H., Nakano, S. & Yoshida, M., 1995, In: Materials Transactions, JIM. 36, 9, p. 1163-1169 7 p.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Influence of solid cohesion on viscous properties in Norton law for aluminum alloys during partial solidification
Nagata, Y., Takai, R., Okane, T., Faiz, M. K. & Yoshida, M., 2022 1月 14, In: Materials Science and Engineering A. 832, 142339.研究成果: Article › 査読
1 被引用数 (Scopus) -
Influence of the factors on thermal conductivity of carbonaceous fiber reinforced aluminum composites
Uozumi, H., Nakanishi, K., Inoue, K., Tsukada, T., Fuyama, N., Fujii, T. & Yoshida, M., 2009 10月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 10, p. 562-568 7 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Interfaces in Al18B4O33/Al, Mg alloy composites
Sasaki, G., Yao, L. J., Yoshida, M., Pan, J. & Fukunaga, H., 1999, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 63, 5, p. 577-580 4 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Interfacial microstructure and fracture characterization of Al18B4O33/Al alloy composites
Sasaki, G., Yoshida, M., Pan, J. & Fukunaga, H., 1999 12月 1, In: Materials Science Research International. 5, 4, p. 276-279 4 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Interfacial modification and impact properties of Nb/MoSi2 laminate composites by the addition of ZrO2, NbSi2, and SiC particles
Lee, S. P., Yoshida, M. & Fukunaga, H., 2000, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 31, 8, p. 2075-2081 7 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Interfacial reaction and its effect on strength of Al18B4O33/Al composites
Pan, J., Sasaki, G., Yao, L. J., Yoshida, M. & Fukunaga, H., 1999 9月, In: Materials Science and Technology. 15, 9, p. 1044-1048 5 p.研究成果: Article › 査読
34 被引用数 (Scopus) -
Investigation of the dominating mechanism of fatigue life for various alloys with CSSC on R = O and -1
Komori, A., Watanabe, E., Toda, M., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 8月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 8, p. 295-299 5 p.研究成果: Article › 査読
-
Low temperature and low pressure bonding of plateless Cu–Cu substrates by Ag-based transient liquid phase sintering
Muhammad, K. F., Yamamoto, T. & Yoshida, M., 2017 7月 1, In: Journal of Materials Science: Materials in Electronics. 28, 13, p. 9351-9362 12 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Low temperature Cu–Cu bonding by transient liquid phase sintering of mixed Cu nanoparticles and Sn–Bi eutectic powders
Khairi Faiz, M., Bansho, K., Suga, T., Miyashita, T. & Yoshida, M., 2017 11月 1, In: Journal of Materials Science: Materials in Electronics. 28, 21, p. 16433-16443 11 p.研究成果: Article › 査読
13 被引用数 (Scopus) -
Measurement of viscous properties on Al-5mass%Mg alloy in semi-solid state by tensile test with high-frequency induction heating
Nagata, Y., Onizawa, R., Someya, M., Kotaki, H., Takai, R., Ebata, M., Okane, T., Faiz, M. K. & Yoshida, M., 2021 2月 15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 71, 2, p. 112-120 9 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Measuring the interfacial heat transfer coefficient between flowing molten alloy and sand mold using fluidity tests
Motoyama, Y., Tokunaga, H., Yoshida, M., Maruyama, T. & Okane, T., 2020 2月, In: Journal of Materials Processing Technology. 276, 116394.研究成果: Article › 査読
3 被引用数 (Scopus) -
Mechanical Properties of a Partially Solidified Cu-Zn Alloy
Kasuya, N., Nakazawa, T., Matsushita, A., Okane, T. & Yoshida, M., 2016 4月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 4, p. 1661-1667 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Mechanical properties of inconel 718 nickel-Based superalloy around solidus temperature
Ohashi, T., Goto, R., Muto, K. & Yoshida, M., 2012 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 76, 2, p. 148-154 7 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Metal pipe joining with aluminum alloy by ultrasonic insert casting
Pan, J., Yoshida, M., Sasaki, G. & Fukunaga, H., 2000, In: Materials and Manufacturing Processes. 15, 6, p. 867-881 15 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Modeling of compocasting process and fabrication of AZ91D magnesium alloy matrix composites
Sasaki, G., Yoshida, M., Fuyama, N. & Fujii, T., 2002 12月 20, In: Journal of Materials Processing Technology. 130-131, p. 151-155 5 p.研究成果: Article › 査読
14 被引用数 (Scopus) -
Modeling of microsegregation and precipitation of iron metallic compounds in Al-Fe-Si ternary alloy
Morishita, M., Ishida, H. & Yoshida, M., 2010 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 4, p. 157-163 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Numerical and experimental study on residual stress in gray cast iron stress lattice shape casting
Motoyama, Y., Takahashi, H., Okane, T., Fukuda, Y. & Yoshida, M., 2013 7月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 7, p. 3261-3270 10 p.研究成果: Article › 査読
11 被引用数 (Scopus) -
Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5mass%Mg alloy
Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 6, p. 214-221 8 p.研究成果: Article › 査読
Open Access -
Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5 mass%Mg Alloy
Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Materials Transactions. 58, 9, p. 1299-1307 9 p.研究成果: Article › 査読
Open Access11 被引用数 (Scopus) -
Prediction method of crack sensitivity during DC casting of Al-Mn and Al-Mg alloys
Morishita, M., Abe, M., Tokuda, K. & Yoshida, M., 2011 2月, In: Materials Transactions. 52, 2, p. 166-172 7 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Prediction method of crack sensitivity during DC casting of Al-Mn and Al-Mg series aluminum alloys
Morishita, M., Abe, M., Tokuda, K. & Yoshida, M., 2009 8月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 8, p. 417-423 7 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Preparation and characterization of aluminum borate whisker reinforced magnesium alloy composites by semi-solid process
Yoshida, M., Takeuchi, S., Pan, J., Sasaki, G., Fuyama, N., Fuj, T. & Fukunaga, H., 1999 1月 1, In: Advanced Composite Materials. 8, 3, p. 259-268 10 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Relationship between Masing behavior and dislocation structure of AISI 1025 under different stress ratios in cyclic deformation
Watanabe, E., Asao, T., Toda, M., Yoshida, M. & Horibe, S., 2013 10月, In: Materials Science and Engineering A. 582, p. 55-62 8 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Rod-lamella transition in directionally solidified Ni-W eutectic alloy
Yoshida, M., Tsujimura, T., Kamata, M. & Nakae, H., 1995, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 59, 6, p. 653-659 7 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Rod-lamella transition in directionally solidified Ni-W eutectic alloy
Yoshida, M., Tsujimura, T., Tsukagoshi, T. & Nakae, H., 1996, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 60, 5, p. 482-489 8 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Separation of AE signals for detecting solidification cracking of Al-7mass%Si alloy by using acoustic emission method
Endo, I., Chiba, H., Ueki, T., Toriyama, T. & Yoshida, M., 2010, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 10, p. 492-498 7 p.研究成果: Article › 査読
-
Solidification of undercooled Cu, Cu-O and Cu-S alloys
Yoshida, M., Muramatsu, T., Hong, J. F. & Nakae, H., 1996, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 60, 11, p. 1095-1100 6 p.研究成果: Article › 査読
Open Access -
TEM study of the interface of anodic-bonded Si/glass
Xing, Q. F., Yoshida, M. & Sasaki, G., 2002 11月 1, In: Scripta Materialia. 47, 9, p. 577-582 6 p.研究成果: Article › 査読
29 被引用数 (Scopus)