TY - GEN
T1 - 1.3-μm waveband multiple-wavelength InAs/InGaAs quantum dot light source for wide wavelength range of 10 Gb/s transmissions over 8-km long holey fiber
AU - Kurata, Yasuaki
AU - Yamamoto, Naokatsu
AU - Akahane, Kouichi
AU - Kawanishi, Tetsuya
AU - Sotobayashi, Hideyuki
AU - Yoshioka, Yuki
AU - Takai, Hiroshi
PY - 2013
Y1 - 2013
N2 - We successfully developed the Quantum Dot (QD) light source in the T-and O-band (Thousand-band: 1.000-1.260 μm and O-band: 1.260-1.360 μm).We used the optical gain chip properties of a single InAs/InGaAs QD to develop a 1.3 μm waveband QD optical frequency comb laser (QD-CML) as the novel functional wavelength divisio nmultiplexing (WDM) light source. The QD-CML can be used for stable generation of multiple-wavelength peaks that the QD-CML can be selected and controlled using the optical interference of the etalon filter. We used holey fiber (HF) transmission line to successfully demonstrate an O-band photonic transport system. In this experiment, each single peak could be clearly selected in the wavelength range the 1286-to 1302 nm. An error-free data transmission of the 10-Gb/s signal with stable multiple-wavelength channels that were generated from a newly developed 1.3 μm waveband multiple-wavelength quantum dot light source was achieved over the low-loss HF that was 8-km long. We suggest that the low cross-talk for a data transmission can be achieved using the multiple-wavelength peaks from the QD light source. Based on these experimental results, it is clear that the generation of multiple-wavelength peaks in the 1.3 μm waveband can be successfully achieved using from the multiple-wavelength QD light source, which acts as a single QD optical gain device.
AB - We successfully developed the Quantum Dot (QD) light source in the T-and O-band (Thousand-band: 1.000-1.260 μm and O-band: 1.260-1.360 μm).We used the optical gain chip properties of a single InAs/InGaAs QD to develop a 1.3 μm waveband QD optical frequency comb laser (QD-CML) as the novel functional wavelength divisio nmultiplexing (WDM) light source. The QD-CML can be used for stable generation of multiple-wavelength peaks that the QD-CML can be selected and controlled using the optical interference of the etalon filter. We used holey fiber (HF) transmission line to successfully demonstrate an O-band photonic transport system. In this experiment, each single peak could be clearly selected in the wavelength range the 1286-to 1302 nm. An error-free data transmission of the 10-Gb/s signal with stable multiple-wavelength channels that were generated from a newly developed 1.3 μm waveband multiple-wavelength quantum dot light source was achieved over the low-loss HF that was 8-km long. We suggest that the low cross-talk for a data transmission can be achieved using the multiple-wavelength peaks from the QD light source. Based on these experimental results, it is clear that the generation of multiple-wavelength peaks in the 1.3 μm waveband can be successfully achieved using from the multiple-wavelength QD light source, which acts as a single QD optical gain device.
KW - Optical communication
KW - Optical transmission system
KW - holey fiber
KW - quantum dot
KW - wavelength division multiplexing (WDM)
UR - http://www.scopus.com/inward/record.url?scp=84879540624&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84879540624&partnerID=8YFLogxK
U2 - 10.1117/12.2002724
DO - 10.1117/12.2002724
M3 - Conference contribution
AN - SCOPUS:84879540624
SN - 9780819494153
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - Optical Metro Networks and Short-Haul Systems V
T2 - Optical Metro Networks and Short-Haul Systems V
Y2 - 5 February 2013 through 7 February 2013
ER -