1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide

Runa Kaneko; Ryosuke Morita; Ryumi Katsuhara; Ryota Yabuki; Atsushi Matsumoto; Koichi Akahane; Yuichi Matsushima; Hiroshi Ishikawa; Katsuyuki Utaka

doi:10.1002/pssa.202100453

1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide

Runa Kaneko^*, Ryosuke Morita, Ryumi Katsuhara, Ryota Yabuki, Atsushi Matsumoto, Koichi Akahane, Yuichi Matsushima, Hiroshi Ishikawa, Katsuyuki Utaka

^*この研究の対応する著者

基幹理工学部

研究成果: Article › 査読

1 被引用数 (Scopus)

抄録

A 1550 nm-band InAs/InGaAlAs quantum dot (QD) distributed feedback (DFB) laser is fabricated, in which the side-wall grating is formed in a simultaneous process with the ridge waveguide, and room-temperature continuous-wave single-mode oscillation is achieved. A rather low-threshold current density of about 2.2 kA cm⁻² is obtained. Side-mode suppression ratios (SMSRs) are 28 dB just above the threshold current I_th and 44 dB at I/I_th = 2.0. Antireflection (AR) coating suppresses the amplified spontaneous emission (ASE) and increases the slope efficiency by a factor of 1.3.

本文言語	English
論文番号	2100453
ジャーナル	Physica Status Solidi (A) Applications and Materials Science
巻	219
号	4
DOI	https://doi.org/10.1002/pssa.202100453
出版ステータス	Published - 2022 2月

ASJC Scopus subject areas

電子材料、光学材料、および磁性材料
凝縮系物理学
表面および界面
表面、皮膜および薄膜
電子工学および電気工学
材料化学

文献へのアクセス

10.1002/pssa.202100453

他のファイルとリンク

フィンガープリント

「1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Kaneko, R., Morita, R., Katsuhara, R., Yabuki, R., Matsumoto, A., Akahane, K., Matsushima, Y., Ishikawa, H., & Utaka, K. (2022). 1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide. Physica Status Solidi (A) Applications and Materials Science, 219(4), Article 2100453. https://doi.org/10.1002/pssa.202100453

Kaneko, R, Morita, R, Katsuhara, R, Yabuki, R, Matsumoto, A, Akahane, K, Matsushima, Y, Ishikawa, H & Utaka, K 2022, '1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide', Physica Status Solidi (A) Applications and Materials Science, vol. 219, no. 4, 2100453. https://doi.org/10.1002/pssa.202100453

@article{9a425a3595824969af4b907951a40a19,

title = "1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide",

abstract = "A 1550 nm-band InAs/InGaAlAs quantum dot (QD) distributed feedback (DFB) laser is fabricated, in which the side-wall grating is formed in a simultaneous process with the ridge waveguide, and room-temperature continuous-wave single-mode oscillation is achieved. A rather low-threshold current density of about 2.2 kA cm−2 is obtained. Side-mode suppression ratios (SMSRs) are 28 dB just above the threshold current Ith and 44 dB at I/Ith = 2.0. Antireflection (AR) coating suppresses the amplified spontaneous emission (ASE) and increases the slope efficiency by a factor of 1.3.",

keywords = "1550 nm-band quantum dots, InAs/InGaAlAs, distributed feedback lasers, single-mode oscillations",

author = "Runa Kaneko and Ryosuke Morita and Ryumi Katsuhara and Ryota Yabuki and Atsushi Matsumoto and Koichi Akahane and Yuichi Matsushima and Hiroshi Ishikawa and Katsuyuki Utaka",

note = "Funding Information: The authors acknowledge support from Matching fund research supporting project between Waseda University and NICT. Publisher Copyright: {\textcopyright} 2021 Wiley-VCH GmbH",

year = "2022",

month = feb,

doi = "10.1002/pssa.202100453",

language = "English",

volume = "219",

journal = "Physica Status Solidi (A) Applications and Materials Science",

issn = "1862-6300",

publisher = "Wiley-VCH Verlag",

number = "4",

}

TY - JOUR

T1 - 1550 nm-Band InAs/InGaAlAs Quantum Dot Distributed Feedback Lasers Grown on InP(311)B Substrate with Side-Wall Gratings Simultaneously Fabricated with a Ridge Waveguide

AU - Kaneko, Runa

AU - Morita, Ryosuke

AU - Katsuhara, Ryumi

AU - Yabuki, Ryota

AU - Matsumoto, Atsushi

AU - Akahane, Koichi

AU - Matsushima, Yuichi

AU - Ishikawa, Hiroshi

AU - Utaka, Katsuyuki

PY - 2022/2

Y1 - 2022/2

N2 - A 1550 nm-band InAs/InGaAlAs quantum dot (QD) distributed feedback (DFB) laser is fabricated, in which the side-wall grating is formed in a simultaneous process with the ridge waveguide, and room-temperature continuous-wave single-mode oscillation is achieved. A rather low-threshold current density of about 2.2 kA cm−2 is obtained. Side-mode suppression ratios (SMSRs) are 28 dB just above the threshold current Ith and 44 dB at I/Ith = 2.0. Antireflection (AR) coating suppresses the amplified spontaneous emission (ASE) and increases the slope efficiency by a factor of 1.3.

AB - A 1550 nm-band InAs/InGaAlAs quantum dot (QD) distributed feedback (DFB) laser is fabricated, in which the side-wall grating is formed in a simultaneous process with the ridge waveguide, and room-temperature continuous-wave single-mode oscillation is achieved. A rather low-threshold current density of about 2.2 kA cm−2 is obtained. Side-mode suppression ratios (SMSRs) are 28 dB just above the threshold current Ith and 44 dB at I/Ith = 2.0. Antireflection (AR) coating suppresses the amplified spontaneous emission (ASE) and increases the slope efficiency by a factor of 1.3.

KW - 1550 nm-band quantum dots

KW - InAs/InGaAlAs

KW - distributed feedback lasers

KW - single-mode oscillations

UR - http://www.scopus.com/inward/record.url?scp=85119074974&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85119074974&partnerID=8YFLogxK

U2 - 10.1002/pssa.202100453

DO - 10.1002/pssa.202100453

M3 - Article

AN - SCOPUS:85119074974

SN - 1862-6300

VL - 219

JO - Physica Status Solidi (A) Applications and Materials Science

JF - Physica Status Solidi (A) Applications and Materials Science

IS - 4

M1 - 2100453

ER -