A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion

Patrícia Tonon, Rodolfo André Kuche Sanches, Kenji Takizawa*, Tayfun E. Tezduyar


研究成果: Article査読

20 被引用数 (Scopus)


Good mesh moving methods are always part of what makes moving-mesh methods good in computation of flow problems with moving boundaries and interfaces, including fluid–structure interaction. Moving-mesh methods, such as the space–time (ST) and arbitrary Lagrangian–Eulerian (ALE) methods, enable mesh-resolution control near solid surfaces and thus high-resolution representation of the boundary layers. Mesh moving based on linear elasticity and mesh-Jacobian-based stiffening (MJBS) has been in use with the ST and ALE methods since 1992. In the MJBS, the objective is to stiffen the smaller elements, which are typically placed near solid surfaces, more than the larger ones, and this is accomplished by altering the way we account for the Jacobian of the transformation from the element domain to the physical domain. In computing the mesh motion between time levels tn and tn+1 with the linear-elasticity equations, the most common option is to compute the displacement from the configuration at tn. While this option works well for most problems, because the method is path-dependent, it involves cycle-to-cycle accumulated mesh distortion. The back-cycle-based mesh moving (BCBMM) method, introduced recently with two versions, can remedy that. In the BCBMM, there is no cycle-to-cycle accumulated distortion. In this article, for the first time, we present mesh moving test computations with the BCBMM. We also introduce a version we call “half-cycle-based mesh moving” (HCBMM) method, and that is for computations where the boundary or interface motion in the second half of the cycle consists of just reversing the steps in the first half and we want the mesh to behave the same way. We present detailed 2D and 3D test computations with finite element meshes, using as the test case the mesh motion associated with wing pitching. The computations show that all versions of the BCBMM perform well, with no cycle-to-cycle accumulated distortion, and with the HCBMM, as the wing in the second half of the cycle just reverses its motion steps in the first half, the mesh behaves the same way.

ジャーナルComputational Mechanics
出版ステータスPublished - 2021 2月

ASJC Scopus subject areas

  • 計算力学
  • 海洋工学
  • 機械工学
  • 計算理論と計算数学
  • 計算数学
  • 応用数学


「A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。