Changes of electro-deposited Sn-Ni alloy thin film for lithium ion battery anodes during charge discharge cycling

H. Mukaibo, T. Momma, T. Osaka*

*この研究の対応する著者

研究成果: Article査読

104 被引用数 (Scopus)

抄録

We have reported in our past work that electrodeposited Sn-Ni alloy with different composition show considerably different performance as anode materials for Li-ion batteries, and the performance was remarkably well (ca. 650 mAh g-1 at 70th cycle) when the composition was controlled to Sn 62Ni38. In this work, structural changes during charge discharge cycling of Sn-Ni alloy with different composition were investigated to evaluate their differences in the cycle performance. From the XRD result, Ni3Sn4 phase was the main phase seen in Sn 62Ni38, and its reversible reactivity with Li was confirmed. We suggest that this is the key phase for its high capacity and lengthened cycle life. From Sn54Ni46, which showed low capacity, only a metastable phase close to the structure of SnNi was confirmed. The results from Sn84Ni16 indicated the presence of pure Sn and Sn rich metastable phase would lead to relatively fast electrode degradation.

本文言語English
ページ(範囲)457-463
ページ数7
ジャーナルJournal of Power Sources
146
1-2
DOI
出版ステータスPublished - 2005 8月 26

ASJC Scopus subject areas

  • 再生可能エネルギー、持続可能性、環境
  • エネルギー工学および電力技術
  • 物理化学および理論化学
  • 電子工学および電気工学

フィンガープリント

「Changes of electro-deposited Sn-Ni alloy thin film for lithium ion battery anodes during charge discharge cycling」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル