Comparison of nano-structuration effects in polypropylene among four typical dielectric properties

Norikazu Fuse*, Yoshimichi Ohki, Toshikatsu Tanaka


研究成果: Article査読

38 被引用数 (Scopus)


Effects of nanofiller addition on four typical dielectric properties, namely permittivity εr', dielectric loss factor εr'', space charge accumulation, and partial discharge (PD) resistance were evaluated for polypropylene (PP) and its nanocomposites (NCs) with nanoclay. While εr' and εr'' are almost independent of temperature and frequency in the base unfilled PP, they are highly dependent on the two parameters in the two NCs. Namely, εr' increases significantly at temperatures above 20 °C and the frequency spectrum of εr'' shows at least one temperature-dependent peak. Furthermore, space charge appears abundantly in the two NCs compared to the base PP. These results indicate that plenty of mobile carriers and/or dipoles, probably resulted from the manufacturing process, remain in the two NCs. Notwithstanding the above-mentioned 'inferior' insulating properties, the two NCs have an improved PD resistance compared with the base PP. Namely, the erosion depth on the surface induced by PDs is the smallest in the NC with the largest filler content, while it is the largest in the base PP. Such differences in the effects of nanofillers on different insulating properties are attributable to the fact that nanofillers can improve the PD resistance simply by their presence, while the chemicals needed for uniform dispersion of nanofillers may sometimes increase the permittivity and abundance of charge carriers.

ジャーナルIEEE Transactions on Dielectrics and Electrical Insulation
出版ステータスPublished - 2010 6月

ASJC Scopus subject areas

  • 電子工学および電気工学


「Comparison of nano-structuration effects in polypropylene among four typical dielectric properties」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。