Development of Permanent Magnet Synchronous Motor Control System for the Traction Purpose of the Gauge Changing Train

Keiichiro Kondo; Hiroshi Hata; Kazuaki Yuki; Katsunori Naganuma; Toshio Hasebe; Koichi Matsuoka

doi:10.1541/ieejias.125.348

Development of Permanent Magnet Synchronous Motor Control System for the Traction Purpose of the Gauge Changing Train

Keiichiro Kondo, Hiroshi Hata, Kazuaki Yuki, Katsunori Naganuma, Toshio Hasebe, Koichi Matsuoka

研究成果: Article › 査読

3 被引用数 (Scopus)

抄録

This paper is aimed at providing the designing method of a permanent magnet synchronous motor (PMSM) control system for the high-speed and the single-phase AC powered Gauge Changing Train (GCT). The state-of-the-art electrical motive unit is equipped with downsized direct drive type PMSMs for the simplified gauge changeable truck. Due to the feeding the AC single phase power, we propose a beat-less control for PMSMs. We verify the development results of designing procedures by the experimental results of operation on a high-speed test line in Colorado, USA.

本文言語	English
ページ（範囲）	348-354
ページ数	7
ジャーナル	ieej transactions on industry applications
巻	125
号	4
DOI	https://doi.org/10.1541/ieejias.125.348
出版ステータス	Published - 2005 9月 1
外部発表	はい

ASJC Scopus subject areas

産業および生産工学
電子工学および電気工学

文献へのアクセス

10.1541/ieejias.125.348

他のファイルとリンク

引用スタイル

@article{7822917f767948b7ab80d6f2613b3f44,

title = "Development of Permanent Magnet Synchronous Motor Control System for the Traction Purpose of the Gauge Changing Train",

abstract = "This paper is aimed at providing the designing method of a permanent magnet synchronous motor (PMSM) control system for the high-speed and the single-phase AC powered Gauge Changing Train (GCT). The state-of-the-art electrical motive unit is equipped with downsized direct drive type PMSMs for the simplified gauge changeable truck. Due to the feeding the AC single phase power, we propose a beat-less control for PMSMs. We verify the development results of designing procedures by the experimental results of operation on a high-speed test line in Colorado, USA.",

keywords = "control method, designing method, permanent magnet synchronous motor, railway vehicle traction",

author = "Keiichiro Kondo and Hiroshi Hata and Kazuaki Yuki and Katsunori Naganuma and Toshio Hasebe and Koichi Matsuoka",

year = "2005",

month = sep,

day = "1",

doi = "10.1541/ieejias.125.348",

language = "English",

volume = "125",

pages = "348--354",

journal = "ieej transactions on industry applications",

issn = "0913-6339",

publisher = "The Institute of Electrical Engineers of Japan",

number = "4",

}

TY - JOUR

T1 - Development of Permanent Magnet Synchronous Motor Control System for the Traction Purpose of the Gauge Changing Train

AU - Kondo, Keiichiro

AU - Hata, Hiroshi

AU - Yuki, Kazuaki

AU - Naganuma, Katsunori

AU - Hasebe, Toshio

AU - Matsuoka, Koichi

PY - 2005/9/1

Y1 - 2005/9/1

N2 - This paper is aimed at providing the designing method of a permanent magnet synchronous motor (PMSM) control system for the high-speed and the single-phase AC powered Gauge Changing Train (GCT). The state-of-the-art electrical motive unit is equipped with downsized direct drive type PMSMs for the simplified gauge changeable truck. Due to the feeding the AC single phase power, we propose a beat-less control for PMSMs. We verify the development results of designing procedures by the experimental results of operation on a high-speed test line in Colorado, USA.

AB - This paper is aimed at providing the designing method of a permanent magnet synchronous motor (PMSM) control system for the high-speed and the single-phase AC powered Gauge Changing Train (GCT). The state-of-the-art electrical motive unit is equipped with downsized direct drive type PMSMs for the simplified gauge changeable truck. Due to the feeding the AC single phase power, we propose a beat-less control for PMSMs. We verify the development results of designing procedures by the experimental results of operation on a high-speed test line in Colorado, USA.

KW - control method

KW - designing method

KW - permanent magnet synchronous motor

KW - railway vehicle traction

UR - http://www.scopus.com/inward/record.url?scp=84906922326&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84906922326&partnerID=8YFLogxK

U2 - 10.1541/ieejias.125.348

DO - 10.1541/ieejias.125.348

M3 - Article

AN - SCOPUS:84906922326

SN - 0913-6339

VL - 125

SP - 348

EP - 354

JO - ieej transactions on industry applications

JF - ieej transactions on industry applications

IS - 4

ER -

Development of Permanent Magnet Synchronous Motor Control System for the Traction Purpose of the Gauge Changing Train

抄録

ASJC Scopus subject areas

文献へのアクセス

他のファイルとリンク

フィンガープリント

引用スタイル