Development of the Improving Process for the 3D Printed Structure

Kensuke Takagishi*, Shinjiro Umezu


研究成果: Article査読

56 被引用数 (Scopus)


The authors focus on the Fused Deposition Modeling (FDM) 3D printer because the FDM 3D printer can print the utility resin material. It can print with low cost and therefore it is the most suitable for home 3D printer. The FDM 3D printer has the problem that it produces layer grooves on the surface of the 3D printed structure. Therefore the authors developed the 3D-Chemical Melting Finishing (3D-CMF) for removing layer grooves. In this method, a pen-style device is filled with a chemical able to dissolve the materials used for building 3D printed structures. By controlling the behavior of this pen-style device, the convex parts of layer grooves on the surface of the 3D printed structure are dissolved, which, in turn, fills the concave parts. In this study it proves the superiority of the 3D-CMF than conventional processing for the 3D printed structure. It proves utilizing the evaluation of the safety, selectively and stability. It confirms the improving of the 3D-CMF and it is confirmed utilizing the data of the surface roughness precision and the observation of the internal state and the evaluation of the mechanical characteristics.

ジャーナルScientific reports
出版ステータスPublished - 2017 1月 5

ASJC Scopus subject areas

  • 一般


「Development of the Improving Process for the 3D Printed Structure」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。