Effect of surface roughness of mechanical seals for rotary blood pumps under blood sealing

Jun Tomioka*, Norifumi Miyanaga


研究成果: Article査読

1 被引用数 (Scopus)


A miniature mechanical seal with the cooling water circulating system have been developed as a solution of the shaft seal problems in rotary blood pumps. The present paper describes the effect of the surface roughness in the sealing gap on the shaft seal problems under blood sealing. The sealing surface roughness of tested three seat rings were designed to be Ra=0.009 urn, Ra=0.088 am and Ra=0.170 urn. The frictional loss torque in the sealing gap and the leakage of the blood and the cooling water were measured in this work. Results show that the maximum frictional loss torque measured in the seat ring of Ra=0.009 jim, and the frictional loss torque decreased as the surface roughness increased. The leakage rate of the cooling water is larger than that of the blood in all seat rings, even though the blood chamber has higher pressure. The sealing characteristics between under blood and water sealing were different. Moreover, the best surface roughness in the torque and the leakage characteristics were also different. Thus, it is important to study under blood sealing in the design of the surface roughness of the mechanical seals for rotary blood pumps.

ジャーナルNihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
出版ステータスPublished - 2010 9月

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 産業および生産工学


「Effect of surface roughness of mechanical seals for rotary blood pumps under blood sealing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。