Estimating the regional distribution potential capacity of introducing solid oxide fuel cells

Ryo Abe; Akane Uemichi; Takashi Ikegami; Atsushi Akisawa

Estimating the regional distribution potential capacity of introducing solid oxide fuel cells

Ryo Abe, Akane Uemichi, Takashi Ikegami, Atsushi Akisawa

創造理工学部

研究成果: Paper › 査読

抄録

This study focuses on the use of Solid Oxide Fuel Cell (SOFC) to large commercial buildings in Japan. This is a novel combined heat and power (CHP) application. SOFC has high power generation efficiency and is expected to be adopted by buildings with relatively smaller heat loads. The effect of CHP is determined by the energy demand of the building, and the energy demand varies not only by the building application but also by region. Therefore, in this study, the adoption of SOFC is analyzed by an optimization model considering energy demand for each region in the case of hospitals, hotels, retail stores and offices as typical commercial buildings. The regional distribution of potential SOFC is also discussed by aggregating them using Geographic Information System (GIS).

本文言語	English
ページ	1104-1112
ページ数	9
出版ステータス	Published - 2020
イベント	33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2020 - Osaka, Japan 継続期間: 2020 6月 29 → 2020 7月 3

Conference

Conference	33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2020
国/地域	Japan
City	Osaka
Period	20/6/29 → 20/7/3

ASJC Scopus subject areas

エネルギー（全般）
工学（全般）
環境科学（全般）

他のファイルとリンク

引用スタイル

@conference{3ef86115eff94a90bf91ff2144c0afdb,

title = "Estimating the regional distribution potential capacity of introducing solid oxide fuel cells",

abstract = "This study focuses on the use of Solid Oxide Fuel Cell (SOFC) to large commercial buildings in Japan. This is a novel combined heat and power (CHP) application. SOFC has high power generation efficiency and is expected to be adopted by buildings with relatively smaller heat loads. The effect of CHP is determined by the energy demand of the building, and the energy demand varies not only by the building application but also by region. Therefore, in this study, the adoption of SOFC is analyzed by an optimization model considering energy demand for each region in the case of hospitals, hotels, retail stores and offices as typical commercial buildings. The regional distribution of potential SOFC is also discussed by aggregating them using Geographic Information System (GIS).",

keywords = "Combined heat and power, Commercial buildings, GIS, Installation potential, SOFC",

author = "Ryo Abe and Akane Uemichi and Takashi Ikegami and Atsushi Akisawa",

note = "Publisher Copyright: {\textcopyright} ECOS 2020.All right reserved.; 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2020 ; Conference date: 29-06-2020 Through 03-07-2020",

year = "2020",

language = "English",

pages = "1104--1112",

}

TY - CONF

T1 - Estimating the regional distribution potential capacity of introducing solid oxide fuel cells

AU - Abe, Ryo

AU - Uemichi, Akane

AU - Ikegami, Takashi

AU - Akisawa, Atsushi

PY - 2020

Y1 - 2020

N2 - This study focuses on the use of Solid Oxide Fuel Cell (SOFC) to large commercial buildings in Japan. This is a novel combined heat and power (CHP) application. SOFC has high power generation efficiency and is expected to be adopted by buildings with relatively smaller heat loads. The effect of CHP is determined by the energy demand of the building, and the energy demand varies not only by the building application but also by region. Therefore, in this study, the adoption of SOFC is analyzed by an optimization model considering energy demand for each region in the case of hospitals, hotels, retail stores and offices as typical commercial buildings. The regional distribution of potential SOFC is also discussed by aggregating them using Geographic Information System (GIS).

AB - This study focuses on the use of Solid Oxide Fuel Cell (SOFC) to large commercial buildings in Japan. This is a novel combined heat and power (CHP) application. SOFC has high power generation efficiency and is expected to be adopted by buildings with relatively smaller heat loads. The effect of CHP is determined by the energy demand of the building, and the energy demand varies not only by the building application but also by region. Therefore, in this study, the adoption of SOFC is analyzed by an optimization model considering energy demand for each region in the case of hospitals, hotels, retail stores and offices as typical commercial buildings. The regional distribution of potential SOFC is also discussed by aggregating them using Geographic Information System (GIS).

KW - Combined heat and power

KW - Commercial buildings

KW - GIS

KW - Installation potential

KW - SOFC

UR - http://www.scopus.com/inward/record.url?scp=85095780823&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85095780823&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:85095780823

SP - 1104

EP - 1112

T2 - 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2020

Y2 - 29 June 2020 through 3 July 2020

ER -

Estimating the regional distribution potential capacity of introducing solid oxide fuel cells

抄録

Conference

ASJC Scopus subject areas

他のファイルとリンク

フィンガープリント

引用スタイル