Micro-ball bump technology for fine-pitch interconnections

Kenji Shimokawa*, Kohei Tatsumi, Eiji Hashino, Yoshio Ohzeki, Masashi Konda, Youji Kawakami


研究成果: Paper査読

6 被引用数 (Scopus)


Micro-ball bump technology has been developed for high density flip chip (FC) interconnections of high performance LSI chips. This technology consists of (1) the production method of fine metal balls (micro-balls) with high accuracy in size and good sphericity in shape and (2) the gang-bonding method of the micro-balls on the electrodes of chips in order to form bumps (micro-ball bumps) for FC interconnections. Gold or solder balls of 35-150 μm in diameter were prepared. After holding the balls on the through-holes of an arrangement plate by a vacuum suction method, the micro-balls are bonded onto the electrodes of the chips. Using an originally developed micro-ball mounter, the balls are successfully arranged on the arrangement plate without excess and lack of balls. The micro-gold bumps of 35 μm in size can be formed with 50 μm pitch or less.

出版ステータスPublished - 1997
イベントProceedings of the 1997 IEEE/CPMT 20th International Electronic Manufacturing Symposium - Tokyo, Jpn
継続期間: 1997 4月 161997 4月 18


OtherProceedings of the 1997 IEEE/CPMT 20th International Electronic Manufacturing Symposium
CityTokyo, Jpn

ASJC Scopus subject areas

  • 産業および生産工学
  • 電子工学および電気工学


「Micro-ball bump technology for fine-pitch interconnections」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。