Origami Robot: A Self-Folding Paper Robot With an Electrothermal Actuator Created by Printing

Hiroki Shigemune, Shingo Maeda, Yusuke Hara, Naoki Hosoya, Shuji Hashimoto

    研究成果: Article査読

    91 被引用数 (Scopus)

    抄録

    A piece of paper has many useful characteristics; it is affordable, lightweight, thin, strong, and highly absorbent. These features allow inexpensive and flexible devices to be fabricated easily and rapidly. We have proposed a new field, "paper mechatronics," which merges printed robotics and paper electronics, and to realize electronic and mechanical systems by printing. Herein, we develop a method to print an actuator and a structure on a sheet of paper. A trilayer electrothermal actuator is printed to activate a printed robot. The paper self-folds along the printed pattern to form the three-dimensional (3-D) structure of the robot body. We also investigate important factors necessary to develop a printed robot. Experiments, including finite element analysis (FEA), confirm our bimetal modeling assumption for the printed actuator and improve the locomotive ability. The key factors in self-folding are paper thickness and humidity. Our findings can improve the reliability of printed robot designs. A self-folding A7-sized paper robot demonstrates locomotion at 10 mm per step.

    本文言語English
    論文番号7519030
    ページ(範囲)2746-2754
    ページ数9
    ジャーナルIEEE/ASME Transactions on Mechatronics
    21
    6
    DOI
    出版ステータスPublished - 2016 12月 1

    ASJC Scopus subject areas

    • 制御およびシステム工学
    • コンピュータ サイエンスの応用
    • 電子工学および電気工学

    フィンガープリント

    「Origami Robot: A Self-Folding Paper Robot With an Electrothermal Actuator Created by Printing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル