Performance analysis of desiccant dehumidification systems driven by low-grade heat source

If a desiccant dehumidification system can be driven by a heat source whose temperature is below 50 °C, exhaust heat from devices such as fuel cells or air conditioners can be used as its heat source, thereby saving energy. Therefore, in this study, we used a previously validated simulation model to determine the minimum heat source temperature for driving a desiccant dehumidification system. We considered four desiccant dehumidification systems that can be driven by waste heat - conventional desiccant-type systems (wheel type and batch type with only desiccant), a system with a precooler, double-stage-type systems (a type with two desiccant wheels and a four-partition desiccant wheel type), and a batch-type system with an internal heat exchanger. We found that among these systems, the last system can be driven by the lowest heated air temperature - approximately 33 °C - which is considerably lower than that of the conventional system.