Polymer microchip for electrophoresis-mass spectrometry fabricated by hot embossing and low temperature direct bonding

T. Suzuki*, F. Kitagawa, H. Shinohara, J. Mizuno, K. Otsuka, S. Shoji

*この研究の対応する著者

研究成果: Conference contribution

9 被引用数 (Scopus)

抄録

Integrated electrophoresis-mass spectrometry polymer devices were fabricated. The electrospray ionization (ESI) emitter tip structure was formed directly at the microchip electrophoresis (MCE) outlet. Since these devices enable negligible dead volume at the electrospray port, efficient spray of the sample necessary for high resolution mass spectrometry (MS) was realized. Stable spray was also achieved at the low flow rate (∼0.1 μL/min) without additional pump. Low cost and high performance COP MCE-MS chip was fabricated by hot embossing and low temperature direct bonding.

本文言語English
ホスト出版物のタイトルTRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems
ページ1617-1620
ページ数4
DOI
出版ステータスPublished - 2007 12月 1
イベント4th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS '07 - Lyon, France
継続期間: 2007 6月 102007 6月 14

出版物シリーズ

名前TRANSDUCERS and EUROSENSORS '07 - 4th International Conference on Solid-State Sensors, Actuators and Microsystems

Conference

Conference4th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS '07
国/地域France
CityLyon
Period07/6/1007/6/14

ASJC Scopus subject areas

  • 制御およびシステム工学
  • 電子工学および電気工学

フィンガープリント

「Polymer microchip for electrophoresis-mass spectrometry fabricated by hot embossing and low temperature direct bonding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル