Thermal stability of the CoWO4 layer formed on ferritic stainless steel

Lu Gan; Toshiyuki Nishimura; Saad Ahmed Sheikh; Isao Saeki; Hideyuki Murakami

doi:10.1016/j.corsci.2020.109037

Thermal stability of the CoWO₄ layer formed on ferritic stainless steel

Lu Gan, Toshiyuki Nishimura, Saad Ahmed Sheikh, Isao Saeki, Hideyuki Murakami^*

^*この研究の対応する著者

大学院先進理工学研究科

研究成果: Article › 査読

4 被引用数 (Scopus)

抄録

This study focuses on the temperature capability of CoWO₄ as the oxidation protection layer of ferritic stainless steel (FSS). The thermogravimetric-differential thermal analysis revealed that until CoWO₄ started to melt at 1297 °C, little mass change was observed. In addition, the coefficient of thermal expansion of CoWO₄ was 11.5 ± 0.2 (×10⁻⁶ K⁻¹), which was similar to that of FSS, evidencing its good thermal stability and compatibility for the protection of FSS. The oxidation test of the Co–W coated specimens at 700 °C – 1000 °C in air confirmed effectiveness of the CoWO₄ layer at T ≤ 850 °C.

本文言語	English
論文番号	109037
ジャーナル	Corrosion Science
巻	176
DOI	https://doi.org/10.1016/j.corsci.2020.109037
出版ステータス	Published - 2020 11月

ASJC Scopus subject areas

化学 (全般)
化学工学（全般）
材料科学（全般）

文献へのアクセス

10.1016/j.corsci.2020.109037

他のファイルとリンク

引用スタイル

@article{65e308acb5a64f2597401eda2b7d27bb,

title = "Thermal stability of the CoWO4 layer formed on ferritic stainless steel",

abstract = "This study focuses on the temperature capability of CoWO4 as the oxidation protection layer of ferritic stainless steel (FSS). The thermogravimetric-differential thermal analysis revealed that until CoWO4 started to melt at 1297 °C, little mass change was observed. In addition, the coefficient of thermal expansion of CoWO4 was 11.5 ± 0.2 (×10−6 K−1), which was similar to that of FSS, evidencing its good thermal stability and compatibility for the protection of FSS. The oxidation test of the Co–W coated specimens at 700 °C – 1000 °C in air confirmed effectiveness of the CoWO4 layer at T ≤ 850 °C.",

keywords = "Oxidation, Oxide coatings, SEM, Stainless steel",

author = "Lu Gan and Toshiyuki Nishimura and Sheikh, {Saad Ahmed} and Isao Saeki and Hideyuki Murakami",

note = "Funding Information: This research was financially supported by the NIMS research program . The authors are thankful to Ms. H. GAO from NIMS for her assistance with the SEM analysis. Publisher Copyright: {\textcopyright} 2020 Elsevier Ltd",

year = "2020",

month = nov,

doi = "10.1016/j.corsci.2020.109037",

language = "English",

volume = "176",

journal = "Corrosion Science",

issn = "0010-938X",

publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Thermal stability of the CoWO4 layer formed on ferritic stainless steel

AU - Gan, Lu

AU - Nishimura, Toshiyuki

AU - Sheikh, Saad Ahmed

AU - Saeki, Isao

AU - Murakami, Hideyuki

N1 - Funding Information: This research was financially supported by the NIMS research program . The authors are thankful to Ms. H. GAO from NIMS for her assistance with the SEM analysis. Publisher Copyright: © 2020 Elsevier Ltd

PY - 2020/11

Y1 - 2020/11

N2 - This study focuses on the temperature capability of CoWO4 as the oxidation protection layer of ferritic stainless steel (FSS). The thermogravimetric-differential thermal analysis revealed that until CoWO4 started to melt at 1297 °C, little mass change was observed. In addition, the coefficient of thermal expansion of CoWO4 was 11.5 ± 0.2 (×10−6 K−1), which was similar to that of FSS, evidencing its good thermal stability and compatibility for the protection of FSS. The oxidation test of the Co–W coated specimens at 700 °C – 1000 °C in air confirmed effectiveness of the CoWO4 layer at T ≤ 850 °C.

AB - This study focuses on the temperature capability of CoWO4 as the oxidation protection layer of ferritic stainless steel (FSS). The thermogravimetric-differential thermal analysis revealed that until CoWO4 started to melt at 1297 °C, little mass change was observed. In addition, the coefficient of thermal expansion of CoWO4 was 11.5 ± 0.2 (×10−6 K−1), which was similar to that of FSS, evidencing its good thermal stability and compatibility for the protection of FSS. The oxidation test of the Co–W coated specimens at 700 °C – 1000 °C in air confirmed effectiveness of the CoWO4 layer at T ≤ 850 °C.

KW - Oxidation

KW - Oxide coatings

KW - SEM

KW - Stainless steel

UR - http://www.scopus.com/inward/record.url?scp=85091930732&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85091930732&partnerID=8YFLogxK

U2 - 10.1016/j.corsci.2020.109037

DO - 10.1016/j.corsci.2020.109037

M3 - Article

AN - SCOPUS:85091930732

SN - 0010-938X

VL - 176

JO - Corrosion Science

JF - Corrosion Science

M1 - 109037

ER -